Sample movies of Dr.Uchiyama Course 7.

【sample】BASIC Bonded Restoration 2

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2. [#1 CR restoration or inlay restoration or table top venner] The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties. [#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)] What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases. First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill. [#3 Composite Resin Filling, clinical case (resin filling)] In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case. [#4 Cementation, clinical case (inlay restoration)] This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting. [#5 Table top venner, clinical case] This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication. [#6 Clinical case (Table top veneer)] Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.

[#1 CR restoration or inlay restoration or table top venner]
The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]
What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.
First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

[#3 Composite Resin Filling, clinical case (resin filling)]
In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

[#4 Cementation, clinical case (inlay restoration)]
This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

[#5 Table top venner, clinical case]
This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

[#6 Clinical case (Table top veneer)]
Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.


BASIC Bonded Restoration 2 (All Videos)

#1 CR restoration or inlay restoration or table top venner

#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)

#3 Composite Resin Filling, clinical case (resin filling)

#4 Cementation, clinical case (inlay restoration)

#5 Table top venner, clinical case

#6 Clinical case (Table top veneer)

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

Mechanical strength of materials

Diagnostic criteria for restoration methods

Onlay type

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases. First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.
First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

Restoration and Prosthodontics of Lost Teeth

Rubber dam

 Removal

Confirmation items

Advantages of rubber dam

Selective etching

Filling

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

Back layer

Pre-treatment

Cementing

Light irradiation

Summary

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

How to use Light Cure and Dual Cure

Case1

Case2

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

Laminated veneers

Table top veneer

Selective etching & bulk fill

Forming

Probi

Selective Etching

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

Etching

Bonding

Cementation

Adjustment and polishing

Case

Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.



[#1 CR restoration or inlay restoration or table top venner]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.

First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.



[#3 Composite Resin Filling, clinical case (resin filling)]

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.



[#4 Cementation, clinical case (inlay restoration)]

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.



[#5 Table top venner, clinical case]

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.



[#6 Clinical case (Table top veneer)]

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.



【sample】BASIC Bonded Restoration 2

Index

BASIC Bonded Restoration 2

【sample】BASIC Bonded Restoration 2