Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

Sample movies of Dr.Uchiyama Course 21.

This video includes all of the following videos from Course21 Maxillofacial Analysis 4.



[#1 Vertical Diagnosis in Craniofacial]

In this 16th and final installment, we present a case of a comprehensive approach using Maxillo Facial Analysis.

The case study begins with a Maxillo Facial Analysis, which can be performed in less than 5 minutes using a PC.



[#2 How to Wax up]

Do you have the image that you do not want to touch the incisal area of highly occlusal worn mandibular anterior teeth because it will soon become dehiscent?

In this case, there was no dehiscence at the time of provisional restoration. This is the result of the correct jaw position diagnosed by cephalometric analysis, which enabled MI and comprehensive treatment.

Please take a look at the following pictures.



[#3 Maxillary final set]

He explained the cases discussed in #2 up to the maxillary final set.

The lecture also reviewed the position of the zirconia frame in the Grade 3 case and cementation in the veneer restoration.



[#4 Case of occlusal collapse of molars]

The occlusal plane is flattened due to the occlusal collapse of the molars, the mandible is anteriorly positioned, the articular disk is anteriorly positioned, and it is difficult to secure the airway.

This presentation will show the analysis and Trial Therapy of a case in which the occlusion and jaw position had to be changed.



[#5 Occlusal reconstruction×ＭＩ]

He explained the final set of cases discussed in #4.

No matter how difficult the case is, "occlusal reconstruction x MI" is realized instead of "changing occlusion and jaw position = full prosthodontics".



22 hours of lectures, 16 sessions in all, "A generalist training course for the next generation of dentists.

What did you think of Dr. Uchiyama's presentation, in which he has faith and pays attention to every detail?

I am sure that each and every one of you who have watched all the contents have felt something different.

We also received a message from Dr. Uchiyama to the young doctors, so please watch the lecture until the end.

Maxillofacial Analysis 4

【sample】Maxillofacial Analysis 4

Sample movies of Dr.Uchiyama Course 20.

This video includes all of the following videos from Course20 Maxillofacial Analysis 3.



[#1 To develop a comprehensive treatment plan]

In clinical practice, we are sometimes faced with situations where we have to treat the entire jaw.

What is the process of comprehensive treatment and what should be taken into consideration when planning a treatment plan?

He explained in detail with various workflows and data.



[#2 Team Approach]

Continued from #1, this is a case that Dr. Uchiyama has been working on from the time when he was a young doctor to the present.

He explained the steps from initial treatment to reevaluation and final prosthetic treatment. He also talked about the necessity of a team approach when re-treatment becomes necessary.

The importance of the team approach is also explained in the latter half of the case.



[#3 Importance of diagnostic wax-up]

Diagnostic wax-ups are indispensable for comprehensive treatment planning because they serve as indicators of treatment goals.

He discussed its importance with actual cases.

In the latter half of the lecture, Dr. Uchiyama explained a case in which he himself created a provisional restoration and a surgical guide from a wax-up when he was a young dentist.



[#4 Diagnostic wax-up notes]

In order to create a diagnostic wax-up, there are many things to consider in order to restore occlusion, not simply esthetic requirements.

Continuing from the second half of #3, he explained in detail the points to keep in mind and actual cases in which wax-ups were used.



[#5 What led me to consider Maxillo Facial Analysis?]

Dr. Uchiyama explained the case that led him to consider Maxillo Facial Analysis, which is currently advocated and practiced by Dr. Uchiyama.

There were several points to be considered in determining the height of the occlusion, and one encounter led to a change in the order of priority.

In the latter half of the presentation, he explained a case in which Maxilla Facial Analysis was actually applied.



[#6 Maxillo Facial Analysis in Practice]

Continuing from the second half of #5, he explained the transition from placement of provisional restorations to final restorations using the Skip Method after determining each step.

In the latter half of the presentation, he explained the classification of prosthetic treatment based on Maxilla Facial Analysis and the cases that fall under each class.



[#7 Classification of Prosthetic Treatment by Maxillo Facial Analysis]

Continuing from #6, we have a commentary on the cases that fall under each Class of the classification of prosthetic treatment by Maxillo Facial Analysis.

In the first half of the presentation, the Class 2 cases are introduced to explain the differences in the points to be considered in each division.

In the second half, he introduced Class 3 cases that require significant improvement.



[#8 Cases requiring significant improvement]

Continuing from the second half of #7, we have received an explanation of Class 3 cases that require significant improvement.

Unlike Class 2, various diagnoses and decisions such as changes in facial appearance, occlusal height diameter, and occlusal plane are required.

The lecture explained the key points of each step, including the final prosthesis and post-operative course, with Dr. Uchiyama's discussion.

Maxillofacial Analysis 3

【sample】Maxillofacial Analysis 3

Sample movies of Dr.Uchiyama Course 19.

This video includes all of the following videos from Course19 Maxillofacial Analysis 2.



[#1 Occlusal reconstruction]

What is a comprehensive treatment plan that takes into account predictability and longevity, rather than just the tooth itself?

In actual clinical practice, most doctors may not have enough time for their patients or have a limited budget.

For example

If a patient says, "Please give me what you think is the best treatment.

What kind of treatment plan would you make if your patient asked you to do what you think is the best treatment?

In this issue

In #1, we discuss what to pay attention to in such a situation.



[#2 Preoperative checkpoints in the aesthetic field]

In #2, he explains veneer restorations for dwarf teeth.

Veneer restoration is a field where there are many concerns about the actual clinical practice because there are various ways of thinking about the margin, the amount of formation, the fabrication of the probing and the temporary attachment, and so on.

Please take a look at Dr. Uchiyama's beautiful fabrication and formation of probes.



[#3 Prep guide]

In Part 3, we will look at provisional restorations for veneer restorations.

In veneer restoration, it is essential to collaborate with an excellent technician, and he carefully explains the points to keep in mind.

The clinical video shows the actual method of provisional restorations and temporary restorations under a micro field of view.



[#4 Adhesion of veneer restoration]

This is the Final set of veneer restorations.

You can learn how to use the rubber dam to prevent moisture and what to keep in mind. And here is a case of an anterior maxillary tooth with surface irregularity and median deviation.

How should we approach this case?



[#5 Case Anterior Guidance granted]

This is the Finalset of the case mentioned in #4.

In Dr. Uchiyama's presentation, we touched upon the comprehensive dentistry realized by Dr. Uchiyama and his Specialists, and I am sure that you have felt the importance of this practice every time you have seen it.

So, why is anterior guidance important again? Please refer to the following page for a detailed explanation.



[#6 SpO2 Pulse and occlusion]

As mentioned in #5, anterior guidance is important, but whether or not active intervention should be performed is critical.

In #6, you will see cases that were solved by occlusal appliance without intervention and cases that were solved by intervention.



What is comprehensive dentistry in practice?

What is the occlusal reconstruction for each patient?



This presentation will give you hints to solve such questions.



[#7 Proximal and distal distances of implants]

This is mandibular anterior implant placement in the case mentioned in #6.

The mandibular anterior region is considered the most difficult to place with barely enough proximal and centrifugal space.

You can take a closer look at it including the impression method.

Through the case study, he emphasizes the importance of Maxillo Facial Analysis in providing anterior guidance and beyond that.

Maxillofacial Analysis 2

【sample】Maxillofacial Analysis 2

Sample movies of Dr.Uchiyama Course 18.

This video includes all of the following videos from Course18 Maxillofacial Analysis 1.



[#1 Diagnosis and consultation]

This presentation is about treatment with a maxillofacial focus.

How do you approach patients who do not maintain their occlusion for various reasons?

This presentation shows how to determine the occlusal height based on maxillofacial information using cephaloanalysis and other methods, and how to determine the prognosis.



This is a full-maxillary treatment for a patient who had difficulty in chewing after a full-maxillary prosthesis 10 years ago.

In #1, we mainly deal with material collection and diagnostic examination. Cephaloanalysis and its results can be viewed.



[#2 Provisional Restoration Fabrication]

This presentation is about maxillofacial treatment.

In #2, you will see the results obtained in #1, wax-up, fabrication of the provisional restorations, and the final set after various processes.

You can learn about the dentist's attitude toward the patient, which is to thoroughly examine and diagnose the patient through careful reevaluation.

Please take a look.

Maxillofacial Analysis 1

【sample】Maxillofacial Analysis 1

Sample movies of Dr.Uchiyama Course 17.

This video includes all of the following videos from Course17 Zirconia framework.



[#1 Shade Taking]

In Part 1, we focused on Shade Taking, which is a major weight in achieving aesthetic desires.

When looking at the shades, do you find that they differ depending on the lightness or darkness in the mouth, or do you find it difficult to understand them after looking at them many times? Dr. Uchiyama has found a way to check Shade in detail on a PC. You will see how to choose a camera for Shade Taking, which is very important for making a judgment, and how to do Shade Taking efficiently.



[#2 Material]

In Part 2, we will discuss restorations for minority teeth.

What is the material of choice for minority restorations? With the evolution of materials, more and more cases can be completed in the spirit of MI. The amount of cutting that we learned in school may be out of date. This lecture explains the process from material selection to actual restoration of molar Table top Veneer (Onlay) and anterior restoration.



[#3 Indications for Zirconia Crown]

Zirconia has been developing at a dizzying pace over the past few years.

Part 3 is a major case study in which zirconia frames are used when occlusal reconstruction is required, as opposed to the minority tooth prosthetics that have been used in the past.

Zirconia framework

【sample】Zirconia framework

Sample movies of Dr.Uchiyama Course 16.

This video includes all of the following videos from Course16 Advanced provisional restoration.



[#1 Material Selection]

Even if you have placed what you consider to be an ideal provisional restoration, it is often dislodged or cracked repeatedly due to strong occlusal forces.

In #1, you can see the material selection and adjustment of the actual four-tooth provisional restorations.



[#2 Provisional Restorations in Digital]

Continuing from #1, the first half of this article discusses resin materials.

It explains what materials are used in cases of acid erosion and excessive occlusal forces.



The fabrication of digital-based provisional restorations is also touched upon.



The second half of the presentation focuses on cases in which the bite has been compromised by prosthetic materials.

He discusses how to diagnose the occlusion and how to simulate the ideal CR position with a wax-up on a model.



[#3 CR position]

Finally, it's time for provisional restorations in upper and lower multiple tooth defects.

The preoperative diagnosis - removal - formation - provisional restoration is introduced in detail.



He also explains in detail the fabrication of provisional restorations in the CR position using a wax-up model.

You will also learn the ability to think about how to clear problams one by one even in more difficult cases. Please take a look.



[#4 Cross byte procedure]

CR position and ICP are not always the same and do not always work well, which I think is one of the main reasons why provisional restoration of multiple teeth is so difficult.



Therefore, Dr. Uchiyama performed the CrossBite procedure in the CR position and performed provisional restorations again in the case mentioned in #3.

It is difficult to get an image from the text, but he explains it in an easy-to-understand manner in the video. Please take a look.



[#5 Importance of Occlusion and Tissue Management]

Finally, the final wash, impression and final. This is the final step from #3.



This is a great reminder of the importance of proper occlusion and tissue management.

Although at first glance provisional restorations may not look like much, you will learn how essential they are for prosthetic treatment that combines both esthetic and functional aspects.

Advanced provisional restoration

【sample】Advanced provisional restoration

Sample movies of Dr.Uchiyama Course 15.

This video includes all of the following videos from Course15 Basic provisional restoration.

[#1 Tooth Preparation Requirements]

What are the requirements for abutment formation as a pre-prosthetic procedure?

It is not just a matter of cutting, but the requirements depend on the final material to be used.

Formation is also related to the maintenance of the provisional restoration.

This session will be discussed in detail using actual cases, photos, and videos.



[#2 Various pre-prosthetic treatments]

Esthetics is not the only requirement for a provisional restoration.

It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration.

He also discusses internal bleaching and gum peeling as pre-prosthetic procedures.



[#3 Dealing with problems]

Provisional restorations also serve as a communication tool for discussion and exchange of ideas with the technician and patient in determining the form of the final restoration.

Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues.

Please take a look at Dr. Uchiyama's innovations.



[#4 Role of the provisioner]

In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision.

He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various roles that provisional restorations play, along with case photos.



[#5 Application to orthodontics]

Provisional restorations are often applied in orthodontic treatment.

The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration.

In the latter half of the lecture, he explains each point of the abutment tooth formation considering gingival homeostasis, from gingival anatomy to actual treatment videos.



[#6 Tissue Management]

Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the formation that takes gingival homeostasis into consideration.

The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit.

The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time.



[#7 Points of impression taking]

This case is a continuation of #6 and shows the series of steps from gingival indentation after final formation and impression taking to the final prosthesis.

He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic.

In addition, there are cases where there are no crowns in the original prosthetic treatment.

In such cases, he explains what should be kept in mind and the reason why the Initial Prep and Final Prep are done separately.



[#8 Setting up an emergence profile]

In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7.

The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash process.



[#9 Impression taking from Final Preparation]

This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted.

The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.



Basic provisional restoration 

【sample】Basic provisional restoration 

Sample movies of Dr.Uchiyama Course 14.

This video includes all of the following videos from Course14 Inlay.



[#1 About Inlay Treatment]

In the #1 video, he explained inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam dampening, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope.



[#2 What is sloped Inlay?]

The #2 video explains the sloped inlay applying the table top veneer concept. The entire process from rubber dam-proofing, caries removal, setting, and occlusal adjustment was explained in the video under the microscope.



[#3 Treatment concept for subgingival caries]

In video #3, he explained how to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice.

He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries.

The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening.



[#4 Summary and course preview]

In video #4, he explained the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he talked about the anterior tooth CAP concept and molar CAP concept in summary.

At the end, Dr. Uchiyama showed us a video introducing the Micro generalist hands on cource for beginners, which will be expanded from next year.

Inlay

【sample】Inlay

Sample movies of Dr.Uchiyama Course 13.

Tabletop design concept based on actual cases First, the concept of tabletop veneers based on the CAP concept we have been explaining is explained. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention. Concept of table top veneers Clinical case, pre-op and post-op Clinical Case Video Commentary Importance of clearance Concept of shrinkage stress CAP from final formation to provisional set The concepts of material selection and formation with tabletop veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts, and even explained the key points of provisional fabrication with table top veneers. After Immidiate dentin sealing Paper on material selection for molars Concept of table top veneer formation Approach to enamel and dentin Table top veneer formation video commentary Video commentary on the procedure for fabricating provisional table-top veneers Final Formation Video Commentary The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained in the video. In this case, we used Flow composite resin for setting and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope. Adhesion process to ceramics Ceramic bonding technique using composite resin Actual bonding process Video commentary Shade selection considering chameleon effect Actual bonding process video commentary Continued Selection of cementation Literature review Clinical use of light-cure and dual-cure cements Actual bonding process video commentary Continued Table-top veneers after bonding

Sloped Occlusal Veneer

【sample】Sloped Occlusal Veneer

Sample movies of Dr.Uchiyama Course 12.

This video includes all of the following videos from Course12 Comprehensive Abutment Procedure 2.



[#1 Comprehensive Abutment Procedure on Molars]

The #1 video first briefly reviews the concept of the Comprehensive abutment procedure, which was also explained in the anterior section. After that, the actual treatment is explained in a flow chart. The video explains the entire process, from the removal of the rubber dam, removal of the crown core, and caries treatment of the treated tooth and adjacent teeth, to the creation of the bulkhead and preparation of the environment for root canal treatment, all using a microscope. The reasons for removing the crowns and cores after rubber dam damming and the data on bonding are also explained in detail.



[#2 Caviton to CAP day2 and beyond Treatment flow from RCT to core]

The #2 video shows the formation based on the CAP concept after the creation of the septum, the adjustment of the provisional, the root canal treatment, the bonding operation in the post and core, and the state of the final abutment tooth formation.



Comprehensive Abutment Procedure 2

【sample】Comprehensive Abutment Procedure 2

Sample movies of Dr.Uchiyama Course 11.

This video includes all of the following videos from Course11 Comprehensive Abutment Procedure1.



[#1 Comprehensive abutment procedure overview case presentation (minimal formation for non-prosthetic teeth)]

In the #1 video, he first explained the concept of the comprehensive abitment procedure.

In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers.



[#2 Digital Dentistry enabling thinnest provisionals Abutment treatment guidelines for erupted teeth Case presentation (importance of micro)]

The #2 video explains the treatment process with the CAP concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The CAP concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary.



[#3 Case Presentation (Case with CAP) Core removal method Bonding]

The #3 video first explains the reason for the direct method of fiber post & core.

It then explains the treatment with the CAP concept through case examples.

The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads.



[#4 About abutment tooth formation and root canal filling About Internal Bleaching]

In the video #4, he first explains the checkpoints during the formation of abutment teeth under the microscope.

After that, he explains the technique of internal bleach for inactive and discolored teeth.

The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope.



[#5 Methods of resin core and abutment tooth formation Formation]

Video #5 is a continuation of #4. Almost the entire video is explained by microscope.

From the fiber post and core after internal bleach, to the formation of the abutment tooth according to the CAP concept, the adjustment of the provisional, and the final formation, all are explained in the video.

The comparison pictures of before and after treatment show that the CAP concept treatment shows good results.



[#6 Case Presentation 2 (Comprehensive Dentistry with CAP)]

The #6 video is an explanation of a case that has been completed and is now in progress.

The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement. The video explained the entire process.



[#7 Case Presentation 3 (approach to a hopeless tooth with no ferrule and coloration)]

The video #7 explains a case in which the CAP concept was used to treat a tooth without ferrule using the technique we have been explaining so far.

In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope.

After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional, all of which are also explained in the video.



[#8 Root Canal Filling of Case Presentation 3 - Final]

Video #8 is a continuation of #7.

As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post & core, and final formation of the abutment teeth, all under the microscope.

He explained in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the CAP concept for treatment.



Comprehensive Abutment Procedure 1

【sample】Comprehensive Abutment Procedure 1

Sample movies of Dr.Uchiyama Course 10.

This video includes all of the following videos from Course10 abutment construction.



[#1 Direct and indirect methods]

In our daily clinical practice, we rarely see an inactive tooth.

In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used.



[#2 Crown removal to bulkhead formation]

Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction.

Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation.



[#3 Causes of root apex lesions]

The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye.

Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style.



[#4 Situations where rubber dam cannot be applied]

When starting root canal treatment, you may encounter many situations where you cannot clamp the rubber dam because of the residual root after removing the core and caries.

In the video of the actual treatment, he explains the steps from the formation of the bulkhead to the creation of the provisional restoration, and also explains the key points of each step.



[#5 Cases to be saved or not]

Continuing from #4, this video shows the treatment steps from root canal treatment after septal formation to root canal filling and provisional restoration.

The latter half of the case is also a very difficult case to decide whether to treat or not, but Dr. Uchiyama chose to preserve it and explains in detail the steps leading up to the root canal filling.

Abutment Construction

【sample】Abutment Construction

Dr. Tetsuya Uchiyama, a dental generalist in Japan, introduced the contents of the video.

Dr. Tetsuya Uchiyama, a dental generalist in Japan, introduced the contents of the video.

Introduction from Dr.Tetsuya Uchiyama

Introduction

Sample movies of Dr.Uchiyama Course 22.

【Sample】BASIC Bonded Restoration -Revised Edition-

This video includes all of the following videos from Course22 BASIC Bonded Restoration -Revised Edition-. [Course22 BASIC Bonded Restoration -Revised Edition-] Composite resin restorations are an effective tool for gaining the trust of patients when successful, as it is a treatment that is performed almost every day in daily clinical practice and is a cosmetic dental procedure that can be performed chairside by the dentist without the help of technicians. Adhesive treatment in dentistry, including composite resin, has evolved remarkably over the past few years with the introduction of many new materials and technologies. Composite resin restorations performed by Dr. Uchiyama have also undergone significant changes since his 2019 lecture.(Course6, Course7, Course8) In this lecture, Dr. Uchiyama will explain the changes in the technique from the past and the points and cautions that are important to know for less invasive and more precise restorative treatment using a microscope. In the case videos, Dr. Uchiyama will explain how to use materials and auxiliary instruments such as clamps, separators, and compression threads, which he actually uses in his clinical practice, through cases of occlusal surfaces, adjacent surfaces, and subgingival caries, which are difficult to approach. He will also discuss the Comprehensive Abutment Procedure and the use of composite resin in inlays and table-top laminate veneers, so this lecture will definitely be useful for your clinical practice from tomorrow. Please watch this lecture. [#1 Advantages of CR Restorations and Future Restorative Treatment] What good can come from focusing on CR restorations? He also explained again about microscopes as a necessary element for high quality restorative treatment. He will discuss the latest findings and techniques of CR restoration, which has undergone many changes in the five years since the last content was published. [#2 Rubber Dam and Consultation] He reviews the advantages of rubber dams, which are also useful in CR restorations, and explains the products used at Micro Dental and how to utilize them. He also introduces the points to keep in mind during the pre-treatment consultation and the knowledge of karyology that should be kept in mind. [#3 Proximal Caries] From here, we will discuss the three most difficult CR restoration patterns (contact, subgingival and occlusal) and advanced cases. First, we will look at contact caries, from the importance of separation from adjacent teeth to each step of cutting and filling, with emphasis on key points. This is a valuable content to see the specific materials and techniques used in the video. [#4 Flowable Resin and Instruments] While showing the treatment of contact caries, he explained the performance of the latest floorable resin on the basis of his paper. Dr. Uchiyama also introduced the other instruments used for filling, which are used by Dr. Uchiyama for precision treatment. The video shows how he performs a series of treatment and explains the treatment to the patient at the end of the treatment. [#5 Cases that are difficult to separate between adjacent teeth and Anterior Teeth Cases] We will discuss the chair, which is important for precise treatment, and look at cases of contact caries that cannot be released and cases of anterior teeth. He explains how to avoid grinding adjacent teeth as much as possible and the CR filling method that minimizes the use of strips and values the original tooth morphology. [#6 Subgingival Caries] This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction. Again, we have a detailed explanation of the equipment used and the detailed technique. [#7 Occlusal Caries] He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side. [#8 Various Advanced Cases] The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. CR restorations are less invasive than other restorative techniques and can be performed without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.

This video includes all of the following videos from Course22 BASIC Bonded Restoration -Revised Edition-.

[Course22 BASIC Bonded Restoration -Revised Edition-]
Composite resin restorations are an effective tool for gaining the trust of patients when successful, as it is a treatment that is performed almost every day in daily clinical practice and is a cosmetic dental procedure that can be performed chairside by the dentist without the help of technicians.
Adhesive treatment in dentistry, including composite resin, has evolved remarkably over the past few years with the introduction of many new materials and technologies.
Composite resin restorations performed by Dr. Uchiyama have also undergone significant changes since his 2019 lecture.(Course6, Course7, Course8)

In this lecture, Dr. Uchiyama will explain the changes in the technique from the past and the points and cautions that are important to know for less invasive and more precise restorative treatment using a microscope.
In the case videos, Dr. Uchiyama will explain how to use materials and auxiliary instruments such as clamps, separators, and compression threads, which he actually uses in his clinical practice, through cases of occlusal surfaces, adjacent surfaces, and subgingival caries, which are difficult to approach.
He will also discuss the Comprehensive Abutment Procedure and the use of composite resin in inlays and table-top laminate veneers, so this lecture will definitely be useful for your clinical practice from tomorrow. Please watch this lecture.

[#1 Advantages of CR Restorations and Future Restorative Treatment]
What good can come from focusing on CR restorations? He also explained again about microscopes as a necessary element for high quality restorative treatment.
He will discuss the latest findings and techniques of CR restoration, which has undergone many changes in the five years since the last content was published.

[#2 Rubber Dam and Consultation]
He reviews the advantages of rubber dams, which are also useful in CR restorations, and explains the products used at Micro Dental and how to utilize them. He also introduces the points to keep in mind during the pre-treatment consultation and the knowledge of karyology that should be kept in mind.

[#3 Proximal Caries]
From here, we will discuss the three most difficult CR restoration patterns (contact, subgingival and occlusal) and advanced cases.
First, we will look at contact caries, from the importance of separation from adjacent teeth to each step of cutting and filling, with emphasis on key points. This is a valuable content to see the specific materials and techniques used in the video.

[#4 Flowable Resin and Instruments]
While showing the treatment of contact caries, he explained the performance of the latest floorable resin on the basis of his paper.
Dr. Uchiyama also introduced the other instruments used for filling, which are used by Dr. Uchiyama for precision treatment. The video shows how he performs a series of treatment and explains the treatment to the patient at the end of the treatment.

[#5 Cases that are difficult to separate between adjacent teeth and Anterior Teeth Cases]
We will discuss the chair, which is important for precise treatment, and look at cases of contact caries that cannot be released and cases of anterior teeth. He explains how to avoid grinding adjacent teeth as much as possible and the CR filling method that minimizes the use of strips and values the original tooth morphology.

[#6 Subgingival Caries]
This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction.
Again, we have a detailed explanation of the equipment used and the detailed technique.

[#7 Occlusal Caries]
He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

[#8 Various Advanced Cases]
The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. CR restorations are less invasive than other restorative techniques and can be performed without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.


BASIC Bonded Restoration -Revised Edition-(All Video)

#1 Advantages of CR Restorations and Future Restorative Treatment

#2 Rubber Dam and Consultation

#3 Proximal Caries

#4 Flowable Resin and Instruments

#5 Cases that are difficult to separate between adjacent teeth and Anterior Teeth Cases

#6 Subgingival Caries

#7 Occlusal Caries

#8 Various Advanced Cases

What good can come from focusing on composite resin restorations? He also explained again about microscopes as a necessary element for high quality restorative treatment. He will discuss the latest findings and techniques of composite resin restoration, which has undergone many changes in the five years since the last content was published.

What good can come from focusing on composite resin restorations? He also explained again about microscopes as a necessary element for high quality restorative treatment.
He will discuss the latest findings and techniques of composite resin restoration, which has undergone many changes in the five years since the last content was published.

#1 Advantages of Composite Resin Restorations and Future Restorative Treatment

Purpose of this session

Memorable cases

Silent consultation

How I came to focus on restorative treatment

The importance of microscope

Input in microscope

Outputs of microscope

The article reviews the advantages of rubber dams, which are also useful in composite resin restorations, and explains the products used in Dr. Uchiyama's dental practice and how to utilize them. He also introduces the points to keep in mind during the pre-treatment consultation and the knowledge of karyology that should be kept in mind.

The article reviews the advantages of rubber dams, which are also useful in composite resin restorations, and explains the products used in Dr. Uchiyama's dental practice and how to utilize them. He also introduces the points to keep in mind during the pre-treatment consultation and the knowledge of karyology that should be kept in mind.

#2 Rubber Dam Dam Dampening and Consultation

Rubber dam

Composite resin restoration of 23 teeth

Consultation

Caries risk

From here, we will discuss the three most difficult composite resin restoration patterns (proximal, subgingival, and occlusal) and advanced cases. First, we will look at proximal caries, from the importance of separation from adjacent teeth to each step of cutting and filling, with emphasis on key points. This is a valuable content to see the specific materials and techniques used in the video.

From here, we will discuss the three most difficult composite resin restoration patterns (proximal, subgingival, and occlusal) and advanced cases.
First, we will look at proximal caries, from the importance of separation from adjacent teeth to each step of cutting and filling, with emphasis on key points. This is a valuable content to see the specific materials and techniques used in the video.

Summary of previous cases

4 composite resin patterns to be explained

Proximal caries

Release

Cutting

Selective Etching

Bonding material

While showing the treatment of contact caries, Dr. Uchiyama explains the performance of the latest floorable resins based on several papers. Dr. Uchiyama also introduced the other instruments used for filling, which are used by him for precision treatment. The video shows how he performs a series of treatment and explains the treatment to the patient at the end of the treatment.

While showing the treatment of contact caries, Dr. Uchiyama explains the performance of the latest floorable resins based on several papers.
Dr. Uchiyama also introduced the other instruments used for filling, which are used by him for precision treatment. The video shows how he performs a series of treatment and explains the treatment to the patient at the end of the treatment.

Summary of previous case

Floorable Resin

Irradiator

Instruments

Scalpel

Case video

Explanation to a patient

We will discuss the chair, which is important for precise treatment, and look at cases of Proximal caries that cannot be released and cases of anterior teeth. He explains how to avoid grinding adjacent teeth as much as possible and the composite resin filling method that minimizes the use of strips and values the original tooth form.

We will discuss the chair, which is important for precise treatment, and look at cases of Proximal caries that cannot be released and cases of anterior teeth. He explains how to avoid grinding adjacent teeth as much as possible and the composite resin filling method that minimizes the use of strips and values the original tooth form.

Fatigue-resistant chairs

Proximal caries that cannot be opened

Fillings that do not destroy tooth morphology

Anterior teeth

This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction. Again, we have a detailed explanation of the equipment used and the detailed technique.

This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction.
Again, we have a detailed explanation of the equipment used and the detailed technique.

Caries below the centrifugal margin

Compression and drainage code

Bent ultrasonic scaler

Filling

Submaxillary margins

He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

bulk filling

Occlusal surface morphology

Drop corn technique

"Big teeth" from ATD Japan

The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. Composite resin restorations are less invasive than other restorative methods and can be treated without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.

The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. Composite resin restorations are less invasive than other restorative methods and can be treated without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.

Case 1 including adjacent and occlusal surfaces

Case 2 including adjacent and occlusal surfaces

Combination of composite resin and inlay

Anterior tooth 1-1

Anterior teeth #3

Coprehensive Abutment Procedure

e.max inlay

Shade

Ascorbic acid

Anterior split dam case

Case of midline deviation

Case with many treatment areas

Case with whitening

A case presented as a crown prosthesis

Summary

BASIC Bonded Restoration -Revised Edition-

This video includes all of the following videos from Course21 Maxillofacial Analysis 4. [#1 Vertical Diagnosis in Craniofacial] In this 16th and final installment, we present a case of a comprehensive approach using Maxillo Facial Analysis. The case study begins with a Maxillo Facial Analysis, which can be performed in less than 5 minutes using a PC. [#2 How to Wax up] Do you have the image that you do not want to touch the incisal area of highly occlusal worn mandibular anterior teeth because it will soon become dehiscent? In this case, there was no dehiscence at the time of provisional restoration. This is the result of the correct jaw position diagnosed by cephalometric analysis, which enabled MI and comprehensive treatment. Please take a look at the following pictures. [#3 Maxillary final restoration set] He explained the cases discussed in #2 up to the maxillary final set. The lecture also reviewed the position of the zirconia frame in the Grade 3 case and cementation in the veneer restoration. [#4 Case of occlusal collapse of molars] The occlusal plane is flattened due to the occlusal collapse of the molars, the mandible is anteriorly positioned, the articular disk is anteriorly positioned, and it is difficult to secure the airway. This presentation will show the analysis and Trial Therapy of a case in which the occlusion and jaw position had to be changed. [#5 Occlusal reconstruction × minimally invasive] He explained the final set of cases discussed in #4. No matter how difficult the case is, "occlusal reconstruction x MI" is realized instead of "changing occlusion and jaw position = full prosthodontics". 22 hours of lectures, 16 sessions in all, "A generalist training course for the next generation of dentists. What did you think of Dr. Uchiyama's presentation, in which he has faith and pays attention to every detail? I am sure that each and every one of you who have watched all the contents have felt something different. We also received a message from Dr. Uchiyama to the young doctors, so please watch the lecture until the end.

This video includes all of the following videos from Course21 Maxillofacial Analysis 4.

[#1 Vertical Diagnosis in Craniofacial]
In this 16th and final installment, we present a case of a comprehensive approach using Maxillo Facial Analysis.
The case study begins with a Maxillo Facial Analysis, which can be performed in less than 5 minutes using a PC.

[#2 How to Wax up]
Do you have the image that you do not want to touch the incisal area of highly occlusal worn mandibular anterior teeth because it will soon become dehiscent?
In this case, there was no dehiscence at the time of provisional restoration. This is the result of the correct jaw position diagnosed by cephalometric analysis, which enabled MI and comprehensive treatment.
Please take a look at the following pictures.

[#3 Maxillary final restoration set]
He explained the cases discussed in #2 up to the maxillary final set.
The lecture also reviewed the position of the zirconia frame in the Grade 3 case and cementation in the veneer restoration.

[#4 Case of occlusal collapse of molars]
The occlusal plane is flattened due to the occlusal collapse of the molars, the mandible is anteriorly positioned, the articular disk is anteriorly positioned, and it is difficult to secure the airway.
This presentation will show the analysis and Trial Therapy of a case in which the occlusion and jaw position had to be changed.

[#5 Occlusal reconstruction × minimally invasive]
He explained the final set of cases discussed in #4.
No matter how difficult the case is, "occlusal reconstruction x MI" is realized instead of "changing occlusion and jaw position = full prosthodontics".

22 hours of lectures, 16 sessions in all, "A generalist training course for the next generation of dentists.
What did you think of Dr. Uchiyama's presentation, in which he has faith and pays attention to every detail?
I am sure that each and every one of you who have watched all the contents have felt something different.
We also received a message from Dr. Uchiyama to the young doctors, so please watch the lecture until the end.

Maxillofacial Analysis 4(All Videos)

#1 Vertical Diagnosis in Craniofacial

#2 How to Wax up

#3 Maxillary final set

#4 Case of occlusal collapse of molars

#5 Occlusal reconstruction×ＭＩ

We will look at a case of a comprehensive approach with Maxillo Facial Analysis. The case begins with a Maxillo Facial Analysis, which can be done in less than 5 minutes using a PC.

We will look at a case of a comprehensive approach with Maxillo Facial Analysis.
The case begins with a Maxillo Facial Analysis, which can be done in less than 5 minutes using a PC.

Overview

Vertical Diagnosis in the Maxillofacial Using Cephalometric Analysis

Maxillo Facial Analysis

Wax up

Do you have the image that you do not want to touch the incisal area of highly occlusal worn mandibular anterior teeth because it will soon become dehiscent? In this case, there was no dehiscence at the time of provisional restoration. These are the results of the correct jaw position diagnosed by cephalometric analysis, which made minimally invasive and comprehensive treatment possible. Please take a look at the mandibular anterior teeth up to the preparation of the final abutment teeth.

Do you have the image that you do not want to touch the incisal area of highly occlusal worn mandibular anterior teeth because it will soon become dehiscent?
In this case, there was no dehiscence at the time of provisional restoration. These are the results of the correct jaw position diagnosed by cephalometric analysis, which made minimally invasive and comprehensive treatment possible.
Please take a look at the mandibular anterior teeth up to the preparation of the final abutment teeth.

How to Wax up

Diagnosis in lower facial elevation

Minimal Invasive Provisional Restoration

Final Preparation of mandibular anterior teeth

This lecture will cover the last case discussed up to the setting of the final maxillary prosthesis. The lecture also reviewed the position of zirconia frames and cementation of veneer restorations in Grade 3 cases.

This lecture will cover the last case discussed up to the setting of the final maxillary prosthesis.
The lecture also reviewed the position of zirconia frames and cementation of veneer restorations in Grade 3 cases.

#3 Maxillary final restoration set

Final Impression

Final Restoration

Maxillary Anterior Provisional Restoration

Type Ⅲ Zirconia Frame work

Anterior maxilla Final Restoration

Anterior guidance　

Type Ⅱ cases　

The occlusal plane is flattened due to the occlusal collapse of the molars, the mandible is anteriorly positioned, the articular disk is anteriorly positioned, and it is difficult to secure the airway. This presentation will show the analysis and Trial Therapy of a case in which the occlusion and jaw position had to be changed.

The occlusal plane is flattened due to the occlusal collapse of the molars, the mandible is anteriorly positioned, the articular disk is anteriorly positioned, and it is difficult to secure the airway.
This presentation will show the analysis and Trial Therapy of a case in which the occlusion and jaw position had to be changed.

Diagnosis and analysis

Treatment planning

Provisional treatment for Trial Therapy

Test position

Diagnostic wax-up

Orthodontic treatment and implants

Trial Therapy

The following is a description of the final set of cases discussed in the last issue. No matter how difficult the case is, minimally invasive occlusal reconstruction is achieved, rather than a full-maxillary prosthesis that only changes occlusion and jaw position. Dr. Uchiyama, who is a man of faith and is particular about every detail of dental treatment, also has a message for young doctors, so please be sure to watch until the end of the lecture.

The following is a description of the final set of cases discussed in the last issue.
No matter how difficult the case is, minimally invasive occlusal reconstruction is achieved, rather than a full-maxillary prosthesis that only changes occlusion and jaw position.

Dr. Uchiyama, who is a man of faith and is particular about every detail of dental treatment, also has a message for young doctors, so please be sure to watch until the end of the lecture.

#5 Occlusal reconstruction × minimally invasive

Trial therapy

Final restoration

Conclusion

Three important elements of comprehensive dental care

This video includes all of the following videos from Course20 Maxillofacial Analysis 3. [#1 To develop a comprehensive treatment plan] In clinical practice, we are sometimes faced with situations where we have to treat the entire jaw. What is the process of comprehensive treatment and what should be taken into consideration when planning a treatment plan? He explained in detail with various workflows and data. [#2 Team Approach] Continued from #1, this is a case that Dr. Uchiyama has been working on from the time when he was a young doctor to the present. He explained the steps from initial treatment to reevaluation and final prosthetic treatment. He also talked about the necessity of a team approach when re-treatment becomes necessary. The importance of the team approach is also explained in the latter half of the case. [#3 Importance of diagnostic wax-up] Diagnostic wax-ups are indispensable for comprehensive treatment planning because they serve as indicators of treatment goals. He discussed its importance with actual cases. In the latter half of the lecture, Dr. Uchiyama explained a case in which he himself created a provisional restoration and a surgical guide from a wax-up when he was a young dentist. [#4 Diagnostic wax-up notes] In order to create a diagnostic wax-up, there are many things to consider in order to restore occlusion, not simply esthetic requirements. Continuing from the second half of #3, he explained in detail the points to keep in mind and actual cases in which wax-ups were used. [#5 What led me to consider Maxillo Facial Analysis?] Dr. Uchiyama explained the case that led him to consider Maxillo Facial Analysis, which is currently advocated and practiced by Dr. Uchiyama. There were several points to be considered in determining the height of the occlusion, and one encounter led to a change in the order of priority. In the latter half of the presentation, he explained a case in which Maxilla Facial Analysis was actually applied. [#6 Maxillo Facial Analysis in Practice] Continuing from the second half of #5, he explained the transition from placement of provisional restorations to final restorations using the Skip Method after determining each step. In the latter half of the presentation, he explained the classification of prosthetic treatment based on Maxilla Facial Analysis and the cases that fall under each class. [#7 Classification of Prosthetic Treatment by Maxillo Facial Analysis] Continuing from #6, we have a commentary on the cases that fall under each Class of the classification of prosthetic treatment by Maxillo Facial Analysis. In the first half of the presentation, the Class 2 cases are introduced to explain the differences in the points to be considered in each division. In the second half, he introduced Class 3 cases that require significant improvement. [#8 Cases requiring significant improvement] Continuing from the second half of #7, we have received an explanation of Class 3 cases that require significant improvement. Unlike Class 2, various diagnoses and decisions such as changes in facial appearance, occlusal height diameter, and occlusal plane are required. The lecture explained the key points of each step, including the final prosthesis and post-operative course, with Dr. Uchiyama's discussion.

This video includes all of the following videos from Course20 Maxillofacial Analysis 3.

[#1 To develop a comprehensive treatment plan]
In clinical practice, we are sometimes faced with situations where we have to treat the entire jaw.
What is the process of comprehensive treatment and what should be taken into consideration when planning a treatment plan?
He explained in detail with various workflows and data.

[#2 Team Approach]
Continued from #1, this is a case that Dr. Uchiyama has been working on from the time when he was a young doctor to the present.
He explained the steps from initial treatment to reevaluation and final prosthetic treatment. He also talked about the necessity of a team approach when re-treatment becomes necessary.
The importance of the team approach is also explained in the latter half of the case.

[#3 Importance of diagnostic wax-up]
Diagnostic wax-ups are indispensable for comprehensive treatment planning because they serve as indicators of treatment goals.
He discussed its importance with actual cases.
In the latter half of the lecture, Dr. Uchiyama explained a case in which he himself created a provisional restoration and a surgical guide from a wax-up when he was a young dentist.

[#4 Diagnostic wax-up notes]
In order to create a diagnostic wax-up, there are many things to consider in order to restore occlusion, not simply esthetic requirements.
Continuing from the second half of #3, he explained in detail the points to keep in mind and actual cases in which wax-ups were used.

[#5 What led me to consider Maxillo Facial Analysis?]
Dr. Uchiyama explained the case that led him to consider Maxillo Facial Analysis, which is currently advocated and practiced by Dr. Uchiyama.
There were several points to be considered in determining the height of the occlusion, and one encounter led to a change in the order of priority.
In the latter half of the presentation, he explained a case in which Maxilla Facial Analysis was actually applied.

[#6 Maxillo Facial Analysis in Practice]
Continuing from the second half of #5, he explained the transition from placement of provisional restorations to final restorations using the Skip Method after determining each step.
In the latter half of the presentation, he explained the classification of prosthetic treatment based on Maxilla Facial Analysis and the cases that fall under each class.

[#7 Classification of Prosthetic Treatment by Maxillo Facial Analysis]
Continuing from #6, we have a commentary on the cases that fall under each Class of the classification of prosthetic treatment by Maxillo Facial Analysis.
In the first half of the presentation, the Class 2 cases are introduced to explain the differences in the points to be considered in each division.
In the second half, he introduced Class 3 cases that require significant improvement.

[#8 Cases requiring significant improvement]
Continuing from the second half of #7, we have received an explanation of Class 3 cases that require significant improvement.
Unlike Class 2, various diagnoses and decisions such as changes in facial appearance, occlusal height diameter, and occlusal plane are required.
The lecture explained the key points of each step, including the final prosthesis and post-operative course, with Dr. Uchiyama's discussion.

Maxillofacial Analysis 3(All Videos)

#1 To develop a comprehensive treatment plan

#2 Team Approach

#3 Importance of diagnostic wax-up

#4 Diagnostic wax-up notes

#5 What led me to consider Maxillo Facial Analysis?

#6 Maxillo Facial Analysis in Practice

#7 Classification of Prosthetic Treatment by Maxillo Facial Analysis

#8 Cases requiring significant improvement

In clinical practice, we are sometimes faced with situations where we have to treat the entire jaw. What is the process of comprehensive treatment and what should be taken into consideration when planning a treatment plan? He explained in detail with various workflows and data.

In clinical practice, we are sometimes faced with situations where we have to treat the entire jaw.
What is the process of comprehensive treatment and what should be taken into consideration when planning a treatment plan?
He explained in detail with various workflows and data.

Tetsuya Uchiyama

About me