Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases. First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.



[#1 CR restoration or inlay restoration or table top venner]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.

First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.



[#3 Composite Resin Filling, clinical case (resin filling)]

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.



[#4 Cementation, clinical case (inlay restoration)]

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.



[#5 Table top venner, clinical case]

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.



[#6 Clinical case (Table top veneer)]

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.



BASIC Bonded Restoration 2

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.
First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)

Restoration and Prosthodontics of Lost Teeth

Rubber dam

 Removal

Confirmation items

Advantages of rubber dam

Selective etching

Filling

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

#1 CR restoration or inlay restoration or table top venner

Mechanical strength of materials

Diagnostic criteria for restoration methods

Onlay type

Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam. In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

This video includes all of the following videos from Course06 BASIC Bonded Restoration 1.



[#1 Bonded Restoration, the advantages of using micro for bonding]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Enamel Preservation & Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)]

In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature.

In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.



[#3 Composite Resin Filling, clinical case (resin filling)]

Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used.

It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products.

Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.



[#4 Bulk Fill, Clinical case (lining to resin filling)]

In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill.

Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.



[#5 Tunneling Technique, clinical case (retreatment of adjacent CR)]

Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind.

In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing.

In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video.

The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice.

The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.



[#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin]

Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam.

In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

BASIC Bonded Restoration 1

Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam.
In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin

MTA cemented pulp lining

Removal of caries from adjacent teeth

Resin filling

Removal of excess resin

Pre-bonding treatment

Resin filling of adjacent surfaces

Polishing with polishing paste

Adjustment of occlusion and morphology

Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind. In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing. In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video. The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice. The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.

Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind.
In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing.
In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video.
The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice.
The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.

#5 Tunneling Technique, clinical case (retreatment of adjacent CR)

From filling to adjusting and polishing

Essentials of filling with Tunneling Technique

Removal of rubber dam

Retreatment of adjacent CR

Tips for infiltration anesthesia

Removal of subgingival caries

In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill. Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.

In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill.
Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.

#4 Bulk Fill, Clinical case (lining to resin filling)

 What is Bulk Fill?

Phenomena caused by resin shrinkage

Introduction of 3M Filtek

Difference in depth of irradiation of irradiator

Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used. It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products. Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.

Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used.
It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products.
Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.

#3 Composite Resin Filling, clinical case (resin filling)

Advantages of 2step

Cases where the universal system should be used

Bonding operation in progress

Instruments and materials used for composite resin filling

Introduction of Drop Cone technique and GRACEFIL ZeroFlo

In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature. In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.

In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature.
In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.

#2 Enamel Preservation & Selective Etching, clinical case (caries removal)

Advantages of Selective Etching

Introduction of instruments and materials used

Removal of caries

Complicated bonding operation in the past

Introduction of Scotch Bond Universal

Changes in bonding systems

2-step or 1-step?

#1 Bonded Restoration, the advantages of using micro for bonding

Basic bonding treatment to protect teeth

 Basic Concept of Bonded Restoration

A case of bonded restoration on a single tooth

Importance of anesthesia and rubber dam

What is bonding?

Importance of magnification instruments

Treatment using micro

Continuing from #6, this lecture is about anterior direct bonding. He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope.&nbsp; Also, the finishing operation is very helpful. Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist. After watching the lecture, you will be able to start your daily clinical practice with a fresh mind. I would like all doctors to watch this lecture.

This video includes all of the following videos from Course05 Rubber Dam Isolation.



[#1 Micro Rubberdam Isolation Systems(M.R.I.S)]

Some doctors may say, "I don't use rubber dam dam-proofing and microscope except for root canal treatment.

In his daily clinical practice, Dr. Uchiyama uses micro and rubber dam to improve the accuracy of treatment.

He talked about the knowledge and techniques to achieve this and the advantages of M.R.I.S. with clinical videos.



[#2 Combined use of pressure-discharge code]

He explained the technique to control gingival indentation and bleeding with high accuracy by using both rubber dam dam dam and pressure drainage code.

Especially, the technique to deal with "cases where it is difficult to apply rubber dam after crown removal" will be immediately useful in daily clinical practice. Dr. Uchiyama's clinical video by micro is outstanding and the content is designed to expand the range of the use of rubber dam dam protection. Please take a look.



[#3 drop cone technique]

He explained about the types of sheets and clamps used in rubber dam damming and the position of drilling holes.

It is said, "To be good at it, you must first have good tools." In this video, Dr. Uchiyama introduced the tools that he actually uses, which is very helpful.

If you are going to start rubber damming from now on, you will be able to get closer to the step-up if you have the minimum kinds of tools introduced in this video.

In the latter half of the article, he explains how to apply the rubber dam dam protection in the case of anterior teeth. Please take a look.



[#4 Efficient clamping for therapeutic purposes]

The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope. 

We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose.

Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice.

You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.



[#5 split dam technique]

He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion.

In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion. 

In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment.

The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.



[#6 Rubber dam and pressure drainage threads during ceramic restoration]

He explained about ceramic restoration and direct bonding.

The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding.

In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step.

By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.



[#7 direct bonding]

Continuing from #6, this lecture is about anterior direct bonding.

He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope. 

Also, the finishing operation is very helpful.

Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist.

After watching the lecture, you will be able to start your daily clinical practice with a fresh mind.

I would like all doctors to watch this lecture.

Rubber Dam Isolation

Continuing from #6, this lecture is about anterior direct bonding.
He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope. 
Also, the finishing operation is very helpful.
Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist.
After watching the lecture, you will be able to start your daily clinical practice with a fresh mind.
I would like all doctors to watch this lecture.

#7 direct bonding

Bonding application

Direct bonding filling operation

Filling of the lateral surface of the lip

Filling of adjacent surfaces

Finishing

Summary of treatment planning concept

He explained about ceramic restoration and direct bonding. The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams.&nbsp; By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding. In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step. By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.

He explained about ceramic restoration and direct bonding.
The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. 
By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding.
In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step.
By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.

#6 Rubber dam and pressure drainage threads during ceramic restoration

Rubber dam and pressure threads during ceramic restorations

How to apply a rubber dam to a molar bridge

Different ways of applying rubber dams

Case presentation

Floor floss for pressure drainage

Anterior treatment with microfluidics

Pre-treatment for direct bonding

He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion. In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion.&nbsp; In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment. The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.

He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion.
In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion. 
In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment.
The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.

#5 split dam technique

Split Dam

Direct bonding for M.R.I.S acid erosion

How to place a rubber dam on an intervening bridge

Rubber dam technique for molars

Adjacent surfaces of molars (Elliot separator)

How to place a rubber dam during root canal treatment

Rubber dam protection during crown restoration

Superiority of ceramics

The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope.&nbsp; We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose. Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice. You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.

The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope. 
We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose.
Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice.
You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.

Tetsuya Uchiyama

About me