Sample movies of Dr.Uchiyama Course 15.

This video includes all of the following videos from Course15 Basic provisional restoration.

[#1 Tooth Preparation Requirements]

What are the requirements for abutment formation as a pre-prosthetic procedure?

It is not just a matter of cutting, but the requirements depend on the final material to be used.

Formation is also related to the maintenance of the provisional restoration.

This session will be discussed in detail using actual cases, photos, and videos.



[#2 Various pre-prosthetic treatments]

Esthetics is not the only requirement for a provisional restoration.

It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration.

He also discusses internal bleaching and gum peeling as pre-prosthetic procedures.



[#3 Dealing with problems]

Provisional restorations also serve as a communication tool for discussion and exchange of ideas with the technician and patient in determining the form of the final restoration.

Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues.

Please take a look at Dr. Uchiyama's innovations.



[#4 Role of the provisioner]

In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision.

He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various roles that provisional restorations play, along with case photos.



[#5 Application to orthodontics]

Provisional restorations are often applied in orthodontic treatment.

The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration.

In the latter half of the lecture, he explains each point of the abutment tooth formation considering gingival homeostasis, from gingival anatomy to actual treatment videos.



[#6 Tissue Management]

Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the formation that takes gingival homeostasis into consideration.

The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit.

The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time.



[#7 Points of impression taking]

This case is a continuation of #6 and shows the series of steps from gingival indentation after final formation and impression taking to the final prosthesis.

He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic.

In addition, there are cases where there are no crowns in the original prosthetic treatment.

In such cases, he explains what should be kept in mind and the reason why the Initial Prep and Final Prep are done separately.



[#8 Setting up an emergence profile]

In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7.

The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash process.



[#9 Impression taking from Final Preparation]

This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted.

The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.



Basic provisional restoration 

Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

【sample】Basic provisional restoration 

This video includes all of the following videos from Course15 Basic provisional restoration. [#1 Tooth Preparation Requirements] What are the requirements for abutment formation as a pre-prosthetic procedure? It is not just a matter of cutting, but the requirements depend on the final material to be used. Formation is also related to the maintenance of the provisional restoration. This session will be discussed in detail using actual cases, photos, and videos. [#2 Various pre-prosthetic treatments] Esthetics is not the only requirement for a provisional restoration. It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration. He also discusses internal bleaching and gum peeling as pre-prosthetic procedures. [#3 Dealing with problems] Provisional restorations also serve as a communication tool for discussion and exchange of ideas with the technician and patient in determining the form of the final restoration. Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues. Please take a look at Dr. Uchiyama's innovations. [#4 Role of the provisioner] In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision. He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various roles that provisional restorations play, along with case photos. [#5 Application to orthodontics] Provisional restorations are often applied in orthodontic treatment. The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration. In the latter half of the lecture, he explains each point of the abutment tooth formation considering gingival homeostasis, from gingival anatomy to actual treatment videos. [#6 Tissue Management] Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the formation that takes gingival homeostasis into consideration. The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit. The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time. [#7 Points of impression taking] This case is a continuation of #6 and shows the series of steps from gingival indentation after final formation and impression taking to the final prosthesis. He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic. In addition, there are cases where there are no crowns in the original prosthetic treatment. In such cases, he explains what should be kept in mind and the reason why the Initial Prep and Final Prep are done separately. [#8 Setting up an emergence profile] In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7. The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash process. [#9 Impression taking from Final Preparation] This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted. The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.

This video includes all of the following videos from Course15 Basic provisional restoration.

[#1 Tooth Preparation Requirements]
What are the requirements for abutment formation as a pre-prosthetic procedure?
It is not just a matter of cutting, but the requirements depend on the final material to be used.
Formation is also related to the maintenance of the provisional restoration.
This session will be discussed in detail using actual cases, photos, and videos.

[#2 Various pre-prosthetic treatments]
Esthetics is not the only requirement for a provisional restoration.
It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration.
He also discusses internal bleaching and gum peeling as pre-prosthetic procedures.

[#3 Dealing with problems]
Provisional restorations also serve as a communication tool for discussion and exchange of ideas with the technician and patient in determining the form of the final restoration.
Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues.
Please take a look at Dr. Uchiyama's innovations.

[#4 Role of the provisioner]
In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision.
He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various roles that provisional restorations play, along with case photos.

[#5 Application to orthodontics]
Provisional restorations are often applied in orthodontic treatment.
The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration.
In the latter half of the lecture, he explains each point of the abutment tooth formation considering gingival homeostasis, from gingival anatomy to actual treatment videos.

[#6 Tissue Management]
Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the formation that takes gingival homeostasis into consideration.
The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit.
The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time.

[#7 Points of impression taking]
This case is a continuation of #6 and shows the series of steps from gingival indentation after final formation and impression taking to the final prosthesis.
He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic.
In addition, there are cases where there are no crowns in the original prosthetic treatment.
In such cases, he explains what should be kept in mind and the reason why the Initial Prep and Final Prep are done separately.

[#8 Setting up an emergence profile]
In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7.
The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash process.

[#9 Impression taking from Final Preparation]
This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted.
The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.


Basic provisional restoration  (All Videos)

#1 Tooth Preparation Requirements

#2 Various pre-prosthetic treatments

#3 Dealing with problems

#4 Role of the provisioner

#5 Application to orthodontics

#6 Tissue Management

#7 Points of impression taking

#8 Setting up an emergence profile

#9 Impression taking from Final Preparation

What are the requirements for abutment preparation as a pre-prosthetic procedure? It is not just a matter of cutting, but the requirements depend on the final material. Preparation is also related to the maintenance of the provisional restoration. This session will be discussed in detail using actual cases, photos, and videos.

What are the requirements for abutment preparation as a pre-prosthetic procedure?
It is not just a matter of cutting, but the requirements depend on the final material.
Preparation is also related to the maintenance of the provisional restoration.
This session will be discussed in detail using actual cases, photos, and videos.

Conditions for Tooth Preparation

Cases with repeated provisional detachment

Confirmation of clearance

Construction using the drop cone technique

Formation after construction

Post-engineering condition

Trial with provisionals

Difference between metal ceramics and all-ceramics

Provisional restorations should not only be esthetic. It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration. He also discusses internal bleaching and gum peeling as pre-prosthetic procedures.

Provisional restorations should not only be esthetic.
It is important how to reproduce the condition of the oral cavity and to be aware of the final restoration, and furthermore, how to reflect the record of the provisional restoration in the final restoration.
He also discusses internal bleaching and gum peeling as pre-prosthetic procedures.

Advantages and disadvantages of the condition of the abutment teeth

Condition after prosthetic removal and reconstruction

Management of soft tissues

Importance of provisional restorations, cross-mounting

Wax-up to zirconia framework

Porcelain build-up

Knife-edged finish line case

Internal bleach as a pre-prosthetic treatment

Gum Peeling

Beginning of abutment tooth formation

Provisional restorations are often applied in orthodontic treatment. The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration. In the latter half of the lecture, he explains each point of the abutment tooth preparation considering gingival homeostasis, from gingival anatomy to actual treatment videos.

Provisional restorations are often applied in orthodontic treatment.
The lecture presents a case study in conjunction with orthodontic treatment and discusses in detail the series of steps from the completion of orthodontic treatment to the final restoration.
In the latter half of the lecture, he explains each point of the abutment tooth preparation considering gingival homeostasis, from gingival anatomy to actual treatment videos.

#5 Conjunction with orthodontics

Condition of post orthodontic abutment teeth

Trial fit of provisional restoration

Wash of provisional restoration

Setting of provisional restorations

Trial Therapy

Gingiva after 6 months of trial and after final restoration

Provisional restorations as a communication tool

Using homeostasis

Gingival indentation

Formation of abutment teeth

Provisional restorations also serve as a communication tool for discussion and exchanging ideas with the technician and patient in determining the form of the final restoration. Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues. Take a look at Dr. Uchiyama's innovations.

Provisional restorations also serve as a communication tool for discussion and exchanging ideas with the technician and patient in determining the form of the final restoration.
Inappropriate provisional restorations can cause inflammation of periodontal tissues, whereas appropriate restorations can help manage the soft tissues.
Take a look at Dr. Uchiyama's innovations.

Post-planning condition and provisional restorations

Before and after provisional restorations

Material selection

Progress after restoration

Treatment planning

From Preprocedure to Final Restoration

Dealing with problems

Insufficient amount of formation

Reforming the abutment teeth

Before and after reconstruction

After restoration

Healthy periodontal tissue

Differences in biological width diameter in different areas

Inflammation control

Modification of provisional restorations

Changes in gingival condition

In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision. He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various effectiveness of provisional restorations, along with case photos.

In the first half of the presentation, he explains a video showing the revision of a provisional restoration, allowing the viewer to confirm the change in gingival inflammation after the revision.
He also explains the difference between temporary crowns and provisional restorations, and explains in detail the various effectiveness of provisional restorations, along with case photos.

#4 Effectiveness of provisional restorations

Revision of provisional restorations

Gingival condition changes

Modification of emergence profile

Tissue management of single and multiple teeth

Temporary crowns and provisional restorations

Role of provisional restorations

Application of provisional restorations in orthodontics

Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the preparation that takes gingival homeostasis into consideration. The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit. The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time.

Continuing from #5, the article explains in detail, with key points, each step up to the setting of the provisional restorations after the preparation that takes gingival homeostasis into consideration.

The number of treatment sessions until the final impression is also affected by how much pre-treatment is done at the initial visit.
The patient's gingival as well as abutment tooth coloration has been changed by not only setting the provisional restorations but also performing the internal bleaching at the same time.

Trial fitting of provisional restoration

Polishing of abutment teeth

Morphological correction of provisional restorations

Internal bleaching of abutment teeth

Gingival and abutment tooth changes at next visit

Comparison with the initial visit

Core construction, gingival decompression

Final formation

This case shows the series of steps from gingival indentation after final preparation and impression taking to the final prosthesis. He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic. In addition, there are cases where there are no crowns in the original prosthetic treatment. In such cases, he explains what should be kept in mind and the reason why the Initial Preparation and Final Preparation are done separately.

This case shows the series of steps from gingival indentation after final preparation and impression taking to the final prosthesis.
He explains the method of gingival indentation and the detailed tips for impression taking, which is important for the creation of the prosthetic.
In addition, there are cases where there are no crowns in the original prosthetic treatment.
In such cases, he explains what should be kept in mind and the reason why the Initial Preparation and Final Preparation are done separately.

Abutment tooth after final formation

Gingival decompression

Taking impression

After final prosthesis

Comparison of before and after surgery

A case with no original crown

Analysis of the abutment tooth after preparation

Difference between initial prep and final prep

Video of the treatment from preparation to adjustment of the provisional restoration

In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7. The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash impression.

In the first half of the video, he explains how to reflect the canine guidance set in the provisional restoration in the final restoration, following #7.
The second half of the video focuses on molar restorations and explains in detail how to set the emergence profile, which tends to be lost during the wash impression.

Gingival differences between initial prep and final prep

Custom incisal table

Intraoral after final prosthesis

A case of restoration on a molar

Discussion of the problem

Re-forming after removal

Abutment tooth after reconstruction

Emergence profile setting

This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted. The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.

This is a continuation of the case #8 in which Initial Preparation was performed. After removal of the provisional restoration, Final Preparation is performed, impressions are taken, and the provisional restoration is readjusted.
The difference between the Initial and Final preparation, gingival indentation, and each step of impression taking are explained in detail.

#9 Final Preparation and Impression taking

Removal of provisional restoration

Clearance measurement

Moving to Final Preparation

Abutment tooth after Final Preparation

Gingival indentation and impression taking

Impression after tray removal

Readjustment of the provisional restoration

Occlusal adjustment

Emergence profile readjustment

Sample movies of Dr.Uchiyama Course 14.

This video includes all of the following videos from Course14 Inlay.



[#1 About Inlay Treatment]

In the #1 video, he explained inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam dampening, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope.



[#2 What is sloped Inlay?]

The #2 video explains the sloped inlay applying the table top veneer concept. The entire process from rubber dam-proofing, caries removal, setting, and occlusal adjustment was explained in the video under the microscope.



[#3 Treatment concept for subgingival caries]

In video #3, he explained how to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice.

He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries.

The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening.



[#4 Summary and course preview]

In video #4, he explained the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he talked about the anterior tooth CAP concept and molar CAP concept in summary.

At the end, Dr. Uchiyama showed us a video introducing the Micro generalist hands on cource for beginners, which will be expanded from next year.

Inlay

【sample】Inlay

This video includes all of the following videos from Course14 Inlay. [#1 About Inlay Treatment] In the #1 video, he explained inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam dampening, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope. [#2 What is sloped Inlay?] The #2 video explains the sloped inlay applying the table top veneer concept. The entire process from rubber dam-proofing, caries removal, setting, and occlusal adjustment was explained in the video under the microscope. [#3 Treatment concept for subgingival caries] In video #3, he explained how to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice. He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries. The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening. [#4 Summary and course preview] In video #4, he explained the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he talked about the anterior tooth CAP concept and molar CAP concept in summary. At the end, Dr. Uchiyama showed us a video introducing the Micro generalist hands on cource for beginners, which will be expanded from next year.

This video includes all of the following videos from Course14 Inlay.

[#1 About Inlay Treatment]
In the #1 video, he explained inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam dampening, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope.

[#2 What is sloped Inlay?]
The #2 video explains the sloped inlay applying the table top veneer concept. The entire process from rubber dam-proofing, caries removal, setting, and occlusal adjustment was explained in the video under the microscope.

[#3 Treatment concept for subgingival caries]
In video #3, he explained how to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice.
He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries.
The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening.

[#4 Summary and course preview]
In video #4, he explained the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he talked about the anterior tooth CAP concept and molar CAP concept in summary.
At the end, Dr. Uchiyama showed us a video introducing the Micro generalist hands on cource for beginners, which will be expanded from next year.


Inlay (All Videos)

#1 About Inlay Treatment

#2 What is sloped Inlay?

#3 Treatment concept for subgingival caries

#4 Summary and course preview

Explain inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam-proofing, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope.

Explain inlay treatment, including material selection, treatment of free enamel at the time of formation, and the necessity of rubber dam dam-proofing, based on literature and past cases. The video then explains the key points from caries treatment, formation, impression, bonding, setting, and occlusal adjustment using a video under the microscope.

About inlay treatment

Concept of zirconia inlay

Basic concept of inlay treatment

Points to note about inlay treatment

Video explanation of inlay bonding

Video commentary on clinical cases from formation to impression　

Video commentary on clinical cases, from setting to occlusal adjustment

Sloped inlay applies the table top veneer concept. The entire process, including rubber dam-proofing, caries removal, setting, and occlusal adjustment, is explained in the video under the microscope.

Sloped inlay applies the table top veneer concept. The entire process, including rubber dam-proofing, caries removal, setting, and occlusal adjustment, is explained in the video under the microscope.

Concept of sloped inlay

Sloped inlay video explanation: removal of caries and immediate dentin sealing　

Sloped inlay video explanation final formation　

Sloped inlay video explanation set

How to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice. He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries. The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening.

How to manage subgingival caries, which is often difficult to deal with when encountered in clinical practice.
He introduced various techniques on how to use a rubber dam to prevent moisture in cases with subgingival caries.
The following is a brief explanation of the techniques and gingival restoration that are necessary for crown lengthening.

Management of subgingival caries Video commentary Gingival indentation, caries removal, and septalization

Management of subgingival caries: Formation, Adjustment of provisional, Root canal treatment, Sloped inlay of adjacent teeth

Management of subgingival caries Core construction, sloped inlay of adjacent teeth

Management of subgingival caries Formation, crown lengthening, post-healing reforming

He showes the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he lectures the anterior tooth CAP concept and molar CAP concept in summary. At the end, Dr. Uchiyama shows us a video introducing the Micro generalist hands on cource for beginners, which has expanded in 2022.

He showes the results of the subgingival margin caries procedure described in video #3 with x-rays. After that, he lectures the anterior tooth CAP concept and molar CAP concept in summary.
At the end, Dr. Uchiyama shows us a video introducing the Micro generalist hands on cource for beginners, which has expanded in 2022.

Management of subgingival caries Treatment results Explanation with x-rays

CAP concept for anterior teeth Summary

CAP concept for molars

Dr. Uchiyama Micro generalist hands on cource for beginners

Sample movies of Dr.Uchiyama Course 13.

Tabletop design concept based on actual cases First, the concept of tabletop veneers based on the CAP concept we have been explaining is explained. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention. Concept of table top veneers Clinical case, pre-op and post-op Clinical Case Video Commentary Importance of clearance Concept of shrinkage stress CAP from final formation to provisional set The concepts of material selection and formation with tabletop veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts, and even explained the key points of provisional fabrication with table top veneers. After Immidiate dentin sealing Paper on material selection for molars Concept of table top veneer formation Approach to enamel and dentin Table top veneer formation video commentary Video commentary on the procedure for fabricating provisional table-top veneers Final Formation Video Commentary The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained in the video. In this case, we used Flow composite resin for setting and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope. Adhesion process to ceramics Ceramic bonding technique using composite resin Actual bonding process Video commentary Shade selection considering chameleon effect Actual bonding process video commentary Continued Selection of cementation Literature review Clinical use of light-cure and dual-cure cements Actual bonding process video commentary Continued Table-top veneers after bonding

Sloped Occlusal Veneer

【sample】Sloped Occlusal Veneer

This video includes all of the following videos from Course13 SVO - Sloped Occlusal Veneer. [#1 Tabletop design concept based on actual cases] In the #1 video, you first explained the concept of table top veneers based on the CAP concept we have been explaining. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention. [#2 CAP from final formation to provisional set] Video #2 is a continuation of #1. The concepts of material selection and formation with table top veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts explained, and even explained the key points of provisional fabrication with table top veneers. [#3 Completion Treatment. About shades and cement and set] The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained with video. In this case, we used Flow composite resin for setting, and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope.

This video includes all of the following videos from Course13 SVO - Sloped Occlusal Veneer.

[#1 Tabletop design concept based on actual cases]
In the #1 video, you first explained the concept of table top veneers based on the CAP concept we have been explaining. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention.

[#2 CAP from final formation to provisional set]
Video #2 is a continuation of #1. The concepts of material selection and formation with table top veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts explained, and even explained the key points of provisional fabrication with table top veneers.

[#3 Completion Treatment. About shades and cement and set]
The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained with video. In this case, we used Flow composite resin for setting, and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope.


Sloped Occlusal Veneer  (All Videos)

#1 Tabletop design concept based on actual cases

#2 CAP from final formation to provisional set

#3 Completion Treatment. About shades and cement and set

First, the concept of tabletop veneers based on the CAP concept we have been explaining is explained. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention.

First, the concept of tabletop veneers based on the CAP concept we have been explaining is explained. After that, he explains the process of treating an inlay with secondary caries with table top veneers based on the video taken with a microscope. The video explanation makes it easy to understand the points that need attention.

Concept of table top veneers

Clinical case, pre-op and post-op

Clinical Case Video Commentary

Importance of clearance

Concept of shrinkage stress

The concepts of material selection and formation with tabletop veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts, and even explained the key points of provisional fabrication with table top veneers.

The concepts of material selection and formation with tabletop veneers were explained based on the literature. The treatment video then continues. He explained the concept of the abutment formation while practicing the concepts, and even explained the key points of provisional fabrication with table top veneers.

After Immidiate dentin sealing

Paper on material selection for molars

Concept of table top veneer formation

Approach to enamel and dentin

Table top veneer formation video commentary

Video commentary on the procedure for fabricating provisional table-top veneers

Final Formation Video Commentary

The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained in the video. In this case, we used Flow composite resin for setting and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope.

The #3 video mainly explains adhesion. First, the internal surface treatment of ceramics is explained in the video. In this case, we used Flow composite resin for setting and explained its superiority over regular cement using the literature. The clinical use of the composite resin is also explained, and the actual bonding process is illustrated in the video under the microscope.

#3 Completion Treatment. About shades and cement and set.

Adhesion process to ceramics

Ceramic bonding technique using composite resin

Actual bonding process Video commentary

Shade selection considering chameleon effect

Actual bonding process video commentary Continued

Selection of cementation Literature review

Clinical use of light-cure and dual-cure cements

Table-top veneers after bonding

Sample movies of Dr.Uchiyama Course 12.

This video includes all of the following videos from Course12 Comprehensive Abutment Procedure 2.



[#1 Comprehensive Abutment Procedure on Molars]

The #1 video first briefly reviews the concept of the Comprehensive abutment procedure, which was also explained in the anterior section. After that, the actual treatment is explained in a flow chart. The video explains the entire process, from the removal of the rubber dam, removal of the crown core, and caries treatment of the treated tooth and adjacent teeth, to the creation of the bulkhead and preparation of the environment for root canal treatment, all using a microscope. The reasons for removing the crowns and cores after rubber dam damming and the data on bonding are also explained in detail.



[#2 Caviton to CAP day2 and beyond Treatment flow from RCT to core]

The #2 video shows the formation based on the CAP concept after the creation of the septum, the adjustment of the provisional, the root canal treatment, the bonding operation in the post and core, and the state of the final abutment tooth formation.



Recent Courses