Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

This video includes all of the following videos from Course08 Advanced Bonded Restoration . [#1 Advanced bonded restoration with little or no tooth reduction] The anterior region has particularly high esthetic demands from the patient, and shade selection is more severe when restoring in resin. He explained the three factors in determining shade and discussed them in the case photos. In the latter half of the presentation, he explained the characteristics of Empress Direct, which approximates the color characteristics of natural teeth, and also explained the actual cases treated with Empress Direct. The last part of the presentation is a case from the time when Dr. Uchiyama was a practicing dentist, and he explains the case with some episodes from those days. Please take a look. [#2 Importance of Anterior Guidance] Anterior guidance is a very important and fundamental element in the construction of occlusion. Lack of anterior guidance causes problems not only in the oral cavity but also in the whole body. In this presentation, he showed a case in which the cuspid guidance was missing, and by constructing the cuspid guidance with CR, not only the occlusion but also the physical problems were improved. In addition, in a case with a low occlusion, the diagnosis was made using a face bow, and based on the results of the diagnosis, provisional bonding was performed. Please take a look.

This video includes all of the following videos from Course08 Advanced Bonded Restoration .



[#1 Advanced bonded restoration with little or no tooth reduction]

The anterior region has particularly high esthetic demands from the patient, and shade selection is more severe when restoring in resin.

He explained the three factors in determining shade and discussed them in the case photos.

In the latter half of the presentation, he explained the characteristics of Empress Direct, which approximates the color characteristics of natural teeth, and also explained the actual cases treated with Empress Direct.

The last part of the presentation is a case from the time when Dr. Uchiyama was a practicing dentist, and he explains the case with some episodes from those days. Please take a look.



[#2 Importance of Anterior Guidance]

Anterior guidance is a very important and fundamental element in the construction of occlusion. Lack of anterior guidance causes problems not only in the oral cavity but also in the whole body.

In this presentation, he showed a case in which the cuspid guidance was missing, and by constructing the cuspid guidance with CR, not only the occlusion but also the physical problems were improved.

In addition, in a case with a low occlusion, the diagnosis was made using a face bow, and based on the results of the diagnosis, provisional bonding was performed. Please take a look.

Advanced Bonded Restoration 

This video includes all of the following videos from Course08 Advanced Bonded Restoration .

[#1 Advanced bonded restoration with little or no tooth reduction]
The anterior region has particularly high esthetic demands from the patient, and shade selection is more severe when restoring in resin.
He explained the three factors in determining shade and discussed them in the case photos.
In the latter half of the presentation, he explained the characteristics of Empress Direct, which approximates the color characteristics of natural teeth, and also explained the actual cases treated with Empress Direct.
The last part of the presentation is a case from the time when Dr. Uchiyama was a practicing dentist, and he explains the case with some episodes from those days. Please take a look.

[#2 Importance of Anterior Guidance]
Anterior guidance is a very important and fundamental element in the construction of occlusion. Lack of anterior guidance causes problems not only in the oral cavity but also in the whole body.
In this presentation, he showed a case in which the cuspid guidance was missing, and by constructing the cuspid guidance with CR, not only the occlusion but also the physical problems were improved.
In addition, in a case with a low occlusion, the diagnosis was made using a face bow, and based on the results of the diagnosis, provisional bonding was performed. Please take a look.

Advanced Bonded Restoration (All Videos)

#1 Advanced bonded restoration with little or no tooth reduction

#2 Importance of Anterior Guidance

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2. [#1 CR restoration or inlay restoration or table top venner] The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties. [#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)] What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases. First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill. [#3 Composite Resin Filling, clinical case (resin filling)] In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case. [#4 Cementation, clinical case (inlay restoration)] This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting. [#5 Table top venner, clinical case] This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication. [#6 Clinical case (Table top veneer)] Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.



[#1 CR restoration or inlay restoration or table top venner]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.

First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.



[#3 Composite Resin Filling, clinical case (resin filling)]

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.



[#4 Cementation, clinical case (inlay restoration)]

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.



[#5 Table top venner, clinical case]

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.



[#6 Clinical case (Table top veneer)]

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.



BASIC Bonded Restoration 2

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.

[#1 CR restoration or inlay restoration or table top venner]
The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]
What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.
First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.

[#3 Composite Resin Filling, clinical case (resin filling)]
In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

[#4 Cementation, clinical case (inlay restoration)]
This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

[#5 Table top venner, clinical case]
This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

[#6 Clinical case (Table top veneer)]
Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.


BASIC Bonded Restoration 2 (All Videos)

#1 CR restoration or inlay restoration or table top venner

#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)

#3 Composite Resin Filling, clinical case (resin filling)

#4 Cementation, clinical case (inlay restoration)

#5 Table top venner, clinical case

#6 Clinical case (Table top veneer)

This video includes all of the following videos from Course06 BASIC Bonded Restoration 1. [#1 Bonded Restoration, the advantages of using micro for bonding] The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties. [#2 Enamel Preservation &amp; Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)] In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature. In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video. [#3 Composite Resin Filling, clinical case (resin filling)] Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used. It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products. Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation. [#4 Bulk Fill, Clinical case (lining to resin filling)] In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill. Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used. [#5 Tunneling Technique, clinical case (retreatment of adjacent CR)] Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind. In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing. In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video. The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice. The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries. [#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin] Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam. In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

This video includes all of the following videos from Course06 BASIC Bonded Restoration 1.



[#1 Bonded Restoration, the advantages of using micro for bonding]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Enamel Preservation & Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)]

In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature.

In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.



[#3 Composite Resin Filling, clinical case (resin filling)]

Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used.

It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products.

Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.



[#4 Bulk Fill, Clinical case (lining to resin filling)]

In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill.

Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.



[#5 Tunneling Technique, clinical case (retreatment of adjacent CR)]

Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind.

In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing.

In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video.

The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice.

The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.



[#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin]

Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam.

In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

BASIC Bonded Restoration 1

This video includes all of the following videos from Course06 BASIC Bonded Restoration 1.

[#1 Bonded Restoration, the advantages of using micro for bonding]
The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.

[#2 Enamel Preservation & Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)]
In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature.
In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.

[#3 Composite Resin Filling, clinical case (resin filling)]
Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used.
It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products.
Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.

[#4 Bulk Fill, Clinical case (lining to resin filling)]
In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill.
Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.

[#5 Tunneling Technique, clinical case (retreatment of adjacent CR)]
Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind.
In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing.
In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video.
The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice.
The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.

[#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin]
Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam.
In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

BASIC Bonded Restoration 1 (All Videos)

#1 Bonded Restoration, the advantages of using micro for bonding

#2 Enamel Preservation & Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)

#4 Bulk Fill, Clinical case (lining to resin filling)

#5 Tunneling Technique, clinical case (retreatment of adjacent CR)

#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin

This video includes all of the following videos from Course05 Rubber Dam Isolation. [#1 Micro Rubberdam Isolation Systems(M.R.I.S)] Some doctors may say, "I don't use rubber dam dam-proofing and microscope except for root canal treatment. In his daily clinical practice, Dr. Uchiyama uses micro and rubber dam to improve the accuracy of treatment. He talked about the knowledge and techniques to achieve this and the advantages of M.R.I.S. with clinical videos. [#2 Combined use of pressure-discharge code] He explained the technique to control gingival indentation and bleeding with high accuracy by using both rubber dam dam dam and pressure drainage code. Especially, the technique to deal with "cases where it is difficult to apply rubber dam after crown removal" will be immediately useful in daily clinical practice. Dr. Uchiyama's clinical video by micro is outstanding and the content is designed to expand the range of the use of rubber dam dam protection. Please take a look. [#3 drop cone technique] He explained about the types of sheets and clamps used in rubber dam damming and the position of drilling holes. It is said, "To be good at it, you must first have good tools." In this video, Dr. Uchiyama introduced the tools that he actually uses, which is very helpful. If you are going to start rubber damming from now on, you will be able to get closer to the step-up if you have the minimum kinds of tools introduced in this video. In the latter half of the article, he explains how to apply the rubber dam dam protection in the case of anterior teeth. Please take a look. [#4 Efficient clamping for therapeutic purposes] The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope.&nbsp; We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose. Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice. You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look. [#5 split dam technique] He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion. In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion.&nbsp; In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment. The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look. [#6 Rubber dam and pressure drainage threads during ceramic restoration] He explained about ceramic restoration and direct bonding. The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding. In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step. By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video. [#7 direct bonding] Continuing from #6, this lecture is about anterior direct bonding. He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope.&nbsp; Also, the finishing operation is very helpful. Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist. After watching the lecture, you will be able to start your daily clinical practice with a fresh mind. I would like all doctors to watch this lecture.

This video includes all of the following videos from Course05 Rubber Dam Isolation.



[#1 Micro Rubberdam Isolation Systems(M.R.I.S)]

Some doctors may say, "I don't use rubber dam dam-proofing and microscope except for root canal treatment.

In his daily clinical practice, Dr. Uchiyama uses micro and rubber dam to improve the accuracy of treatment.

He talked about the knowledge and techniques to achieve this and the advantages of M.R.I.S. with clinical videos.



[#2 Combined use of pressure-discharge code]

He explained the technique to control gingival indentation and bleeding with high accuracy by using both rubber dam dam dam and pressure drainage code.

Especially, the technique to deal with "cases where it is difficult to apply rubber dam after crown removal" will be immediately useful in daily clinical practice. Dr. Uchiyama's clinical video by micro is outstanding and the content is designed to expand the range of the use of rubber dam dam protection. Please take a look.



[#3 drop cone technique]

He explained about the types of sheets and clamps used in rubber dam damming and the position of drilling holes.

It is said, "To be good at it, you must first have good tools." In this video, Dr. Uchiyama introduced the tools that he actually uses, which is very helpful.

If you are going to start rubber damming from now on, you will be able to get closer to the step-up if you have the minimum kinds of tools introduced in this video.

In the latter half of the article, he explains how to apply the rubber dam dam protection in the case of anterior teeth. Please take a look.



[#4 Efficient clamping for therapeutic purposes]

The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope. 

We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose.

Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice.

You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.



[#5 split dam technique]

He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion.

In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion. 

In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment.

The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.



[#6 Rubber dam and pressure drainage threads during ceramic restoration]

He explained about ceramic restoration and direct bonding.

The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding.

In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step.

By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.



[#7 direct bonding]

Continuing from #6, this lecture is about anterior direct bonding.

He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope. 

Also, the finishing operation is very helpful.

Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist.

After watching the lecture, you will be able to start your daily clinical practice with a fresh mind.

I would like all doctors to watch this lecture.

Rubber Dam Isolation

This video includes all of the following videos from Course05 Rubber Dam Isolation.

[#1 Micro Rubberdam Isolation Systems(M.R.I.S)]
Some doctors may say, "I don't use rubber dam dam-proofing and microscope except for root canal treatment.
In his daily clinical practice, Dr. Uchiyama uses micro and rubber dam to improve the accuracy of treatment.
He talked about the knowledge and techniques to achieve this and the advantages of M.R.I.S. with clinical videos.

[#2 Combined use of pressure-discharge code]
He explained the technique to control gingival indentation and bleeding with high accuracy by using both rubber dam dam dam and pressure drainage code.
Especially, the technique to deal with "cases where it is difficult to apply rubber dam after crown removal" will be immediately useful in daily clinical practice. Dr. Uchiyama's clinical video by micro is outstanding and the content is designed to expand the range of the use of rubber dam dam protection. Please take a look.

[#3 drop cone technique]
He explained about the types of sheets and clamps used in rubber dam damming and the position of drilling holes.
It is said, "To be good at it, you must first have good tools." In this video, Dr. Uchiyama introduced the tools that he actually uses, which is very helpful.
If you are going to start rubber damming from now on, you will be able to get closer to the step-up if you have the minimum kinds of tools introduced in this video.
In the latter half of the article, he explains how to apply the rubber dam dam protection in the case of anterior teeth. Please take a look.

[#4 Efficient clamping for therapeutic purposes]
The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope. 
We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose.
Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice.
You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.

[#5 split dam technique]
He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion.
In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion. 
In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment.
The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.

[#6 Rubber dam and pressure drainage threads during ceramic restoration]
He explained about ceramic restoration and direct bonding.
The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding.
In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step.
By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.

[#7 direct bonding]
Continuing from #6, this lecture is about anterior direct bonding.
He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope. 
Also, the finishing operation is very helpful.
Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist.
After watching the lecture, you will be able to start your daily clinical practice with a fresh mind.
I would like all doctors to watch this lecture.


Rubber Dam Isolation (All Videos)

#1 Micro Rubberdam Isolation Systems(M.R.I.S)

#2 Combined use of pressure-discharge code

#3 drop cone technique

#4 Efficient clamping for therapeutic purposes

#5 split dam technique

#6 Rubber dam and pressure drainage threads during ceramic restoration

#7 direct bonding

This video includes all of the following videos from Course04 Anesthesia. [#1 Pain-free infiltration anesthesia] Infiltration anesthesia is one of the most patient-unfriendly medical procedures, even though it is performed for most dental procedures. We want to reduce the burden on patients as much as possible. In #1, he carefully explains the pharmacological effects and physiological characteristics of infiltration anesthesia and analyzes the reasons why patients do not like it in actual clinical practice and the countermeasures against it. [#2 Various methods of infiltration anesthesia] Do you have trouble with patients who have difficulty with infiltration anesthesia? In #2, you have an explanation focusing on the actual method of administering it. Using diagrams and actual clinical videos, he explains in an easy-to-understand manner the countermeasures to be taken when there is inflammation in the tissues, points to keep in mind for mandibular foramen transfer anesthesia, and positioning methods, so you can immediately apply the content in your clinical practice from tomorrow. [#3 Various methods of administering transmissible anesthesia] #3 is the application of transfer anesthesia. If you have the knowledge and skills to provide transfer anesthesia to the infraorbital foramen, incisal foramen, and foramen magnum, you can provide a more painless treatment during surgical procedures in the maxilla. You will learn the anatomical features, the range of effects that can be given, and how to actually do it.

This video includes all of the following videos from Course04 Anesthesia.



[#1 Pain-free infiltration anesthesia]

Infiltration anesthesia is one of the most patient-unfriendly medical procedures, even though it is performed for most dental procedures. We want to reduce the burden on patients as much as possible.

In #1, he carefully explains the pharmacological effects and physiological characteristics of infiltration anesthesia and analyzes the reasons why patients do not like it in actual clinical practice and the countermeasures against it.



[#2 Various methods of infiltration anesthesia]

Do you have trouble with patients who have difficulty with infiltration anesthesia?

In #2, you have an explanation focusing on the actual method of administering it. Using diagrams and actual clinical videos, he explains in an easy-to-understand manner the countermeasures to be taken when there is inflammation in the tissues, points to keep in mind for mandibular foramen transfer anesthesia, and positioning methods, so you can immediately apply the content in your clinical practice from tomorrow.



[#3 Various methods of administering transmissible anesthesia]

#3 is the application of transfer anesthesia. If you have the knowledge and skills to provide transfer anesthesia to the infraorbital foramen, incisal foramen, and foramen magnum, you can provide a more painless treatment during surgical procedures in the maxilla. You will learn the anatomical features, the range of effects that can be given, and how to actually do it.

Anesthesia

This video includes all of the following videos from Course04 Anesthesia.

[#1 Pain-free infiltration anesthesia]
Infiltration anesthesia is one of the most patient-unfriendly medical procedures, even though it is performed for most dental procedures. We want to reduce the burden on patients as much as possible.
In #1, he carefully explains the pharmacological effects and physiological characteristics of infiltration anesthesia and analyzes the reasons why patients do not like it in actual clinical practice and the countermeasures against it.

[#2 Various methods of infiltration anesthesia]
Do you have trouble with patients who have difficulty with infiltration anesthesia?
In #2, you have an explanation focusing on the actual method of administering it. Using diagrams and actual clinical videos, he explains in an easy-to-understand manner the countermeasures to be taken when there is inflammation in the tissues, points to keep in mind for mandibular foramen transfer anesthesia, and positioning methods, so you can immediately apply the content in your clinical practice from tomorrow.

[#3 Various methods of administering transmissible anesthesia]
#3 is the application of transfer anesthesia. If you have the knowledge and skills to provide transfer anesthesia to the infraorbital foramen, incisal foramen, and foramen magnum, you can provide a more painless treatment during surgical procedures in the maxilla. You will learn the anatomical features, the range of effects that can be given, and how to actually do it.

Anesthesia (All Videos)

#1 Pain-free infiltration anesthesia

#2 Various methods of infiltration anesthesia

#3 Various methods of administering transmissible anesthesia

This video includes all of the following videos from Course03 Microscope. [#1 Advantages of Microscopes] Do you think that the microscope is a tool for specialists who use it for treatments performed by specialists? According to Dr. Uchiyama, it is a necessary tool for generalists who can use it for any kind of treatment. He told us about his encounter with the microscope and the changes that have occurred in his practice and body since he started using it in his clinical practice. He also talks about the method he actually uses in his clinical practice from each point of view on the issue of whether the mirror technique is better or the direct view is better. [#2 Vision Control in EXTARO 300 ] Although we tend to focus on the ease of use of microscopes, such as magnification and handling, it is also necessary to know about the type of light source. He explained in detail the differences in visibility between xenon, halogen, and LED light sources. He said, "When you use a microscope, you can simply see and fill the root canal there and it will be cured. That's all there is to it. That's all there is to it," said Dr. Uchiyama. You should not miss the actual clinical video of a root canal, which is difficult to see in the dark, taken with a microscope. He also talks about a difficult case of root canal filling of a mandibular molar. [#3 How to record movies with EXTARO 300] When recording photos or videos of a microscopic examination, not just any camera will do. It is necessary to understand the features of the microscope and the features of the camera equipment, and to choose a combination that makes the best use of both. In this session, we talked about the functions and features of microscopes, as well as the minimum camera functions you should know. [#4 Microscopes and rubber dam] Don't you think that rubber dams are just for performance and don't affect your clinical practice with or without them? There was a time when Dr. Uchiyama himself actually did not use them. However, he now uses rubber dams in all cases when he can. He summarized the advantages of using rubber dams and how to prepare them in advance. He also discussed how to form the abutment teeth with a microscope and how to create a provisional restoration. Please also pay attention to Dr. Uchiyama's focus on how to eliminate bleeding from the gingiva. [#5 Advantages of rubber dam 1] When rubber dam protection is used in restorative treatment, it is necessary to drill holes with a certain degree of vigor. Dr. Uchiyama has made it more efficient by using the same drilling method for anterior teeth, molars, and root canal treatment. In the first half of the lecture, he talked about the drilling and fixing methods and the use of floss to fix the rubber dam firmly in place. In the second half of the lecture, he discussed a difficult case in which the gingiva was black and transparent due to root staining, and esthetically restored the tooth using a microscope and a rubber dam. [#6 Advantages of rubber dam 2] In the first half of the presentation, he discussed tips for molar rubber damming to ensure a good target tooth while maintaining a good field of view. The method of fixation without the use of clamps is very useful and improves operability and field of view. In the latter part of the lecture, he taught us how to directly construct the abutment without grinding or extracting the tooth for anterior teeth with low crown height diameters due to living teeth. The best results can be achieved by understanding the characteristics of the materials used and selecting and treating the appropriate cases. [#7 Bonding with microscope] This is a CR restoration using a microscope and rubber dam. Using actual microscopic cases, he taught us how to do plaque out and how to remove excess resin, and he explained each step in detail, mentioning recommended instruments and materials. When extraction is performed under the microscope, it is easy to see the difference between the bone surface, soft tissue, and even the defective granulation during curettage of the extraction socket. This video shows the importance of preoperative CT diagnosis and the importance of anticipating post-extraction treatment.

This video includes all of the following videos from Course03 Microscope.



[#1 Advantages of Microscopes]

Do you think that the microscope is a tool for specialists who use it for treatments performed by specialists? According to Dr. Uchiyama, it is a necessary tool for generalists who can use it for any kind of treatment.

He told us about his encounter with the microscope and the changes that have occurred in his practice and body since he started using it in his clinical practice.

He also talks about the method he actually uses in his clinical practice from each point of view on the issue of whether the mirror technique is better or the direct view is better.



[#2 Vision Control in EXTARO 300 ]

Although we tend to focus on the ease of use of microscopes, such as magnification and handling, it is also necessary to know about the type of light source. He explained in detail the differences in visibility between xenon, halogen, and LED light sources.

He said, "When you use a microscope, you can simply see and fill the root canal there and it will be cured. That's all there is to it. That's all there is to it," said Dr. Uchiyama. You should not miss the actual clinical video of a root canal, which is difficult to see in the dark, taken with a microscope.

He also talks about a difficult case of root canal filling of a mandibular molar.



[#3 How to record movies with EXTARO 300]

When recording photos or videos of a microscopic examination, not just any camera will do. It is necessary to understand the features of the microscope and the features of the camera equipment, and to choose a combination that makes the best use of both.

In this session, we talked about the functions and features of microscopes, as well as the minimum camera functions you should know.



[#4 Microscopes and rubber dam]

Don't you think that rubber dams are just for performance and don't affect your clinical practice with or without them?

There was a time when Dr. Uchiyama himself actually did not use them. However, he now uses rubber dams in all cases when he can. He summarized the advantages of using rubber dams and how to prepare them in advance.

He also discussed how to form the abutment teeth with a microscope and how to create a provisional restoration. Please also pay attention to Dr. Uchiyama's focus on how to eliminate bleeding from the gingiva.



[#5 Advantages of rubber dam 1]

When rubber dam protection is used in restorative treatment, it is necessary to drill holes with a certain degree of vigor. Dr. Uchiyama has made it more efficient by using the same drilling method for anterior teeth, molars, and root canal treatment. In the first half of the lecture, he talked about the drilling and fixing methods and the use of floss to fix the rubber dam firmly in place.

In the second half of the lecture, he discussed a difficult case in which the gingiva was black and transparent due to root staining, and esthetically restored the tooth using a microscope and a rubber dam.



[#6 Advantages of rubber dam 2]

In the first half of the presentation, he discussed tips for molar rubber damming to ensure a good target tooth while maintaining a good field of view. The method of fixation without the use of clamps is very useful and improves operability and field of view.

In the latter part of the lecture, he taught us how to directly construct the abutment without grinding or extracting the tooth for anterior teeth with low crown height diameters due to living teeth. The best results can be achieved by understanding the characteristics of the materials used and selecting and treating the appropriate cases.



[#7 Bonding with microscope]

This is a CR restoration using a microscope and rubber dam. Using actual microscopic cases, he taught us how to do plaque out and how to remove excess resin, and he explained each step in detail, mentioning recommended instruments and materials.

When extraction is performed under the microscope, it is easy to see the difference between the bone surface, soft tissue, and even the defective granulation during curettage of the extraction socket.

This video shows the importance of preoperative CT diagnosis and the importance of anticipating post-extraction treatment.



Microscope

This video includes all of the following videos from Course03 Microscope.

[#1 Advantages of Microscopes]
Do you think that the microscope is a tool for specialists who use it for treatments performed by specialists? According to Dr. Uchiyama, it is a necessary tool for generalists who can use it for any kind of treatment.
He told us about his encounter with the microscope and the changes that have occurred in his practice and body since he started using it in his clinical practice.
He also talks about the method he actually uses in his clinical practice from each point of view on the issue of whether the mirror technique is better or the direct view is better.

[#2 Vision Control in EXTARO 300 ]
Although we tend to focus on the ease of use of microscopes, such as magnification and handling, it is also necessary to know about the type of light source. He explained in detail the differences in visibility between xenon, halogen, and LED light sources.
He said, "When you use a microscope, you can simply see and fill the root canal there and it will be cured. That's all there is to it. That's all there is to it," said Dr. Uchiyama. You should not miss the actual clinical video of a root canal, which is difficult to see in the dark, taken with a microscope.
He also talks about a difficult case of root canal filling of a mandibular molar.

[#3 How to record movies with EXTARO 300]
When recording photos or videos of a microscopic examination, not just any camera will do. It is necessary to understand the features of the microscope and the features of the camera equipment, and to choose a combination that makes the best use of both.
In this session, we talked about the functions and features of microscopes, as well as the minimum camera functions you should know.

[#4 Microscopes and rubber dam]
Don't you think that rubber dams are just for performance and don't affect your clinical practice with or without them?
There was a time when Dr. Uchiyama himself actually did not use them. However, he now uses rubber dams in all cases when he can. He summarized the advantages of using rubber dams and how to prepare them in advance.
He also discussed how to form the abutment teeth with a microscope and how to create a provisional restoration. Please also pay attention to Dr. Uchiyama's focus on how to eliminate bleeding from the gingiva.

[#5 Advantages of rubber dam 1]
When rubber dam protection is used in restorative treatment, it is necessary to drill holes with a certain degree of vigor. Dr. Uchiyama has made it more efficient by using the same drilling method for anterior teeth, molars, and root canal treatment. In the first half of the lecture, he talked about the drilling and fixing methods and the use of floss to fix the rubber dam firmly in place.
In the second half of the lecture, he discussed a difficult case in which the gingiva was black and transparent due to root staining, and esthetically restored the tooth using a microscope and a rubber dam.

[#6 Advantages of rubber dam 2]
In the first half of the presentation, he discussed tips for molar rubber damming to ensure a good target tooth while maintaining a good field of view. The method of fixation without the use of clamps is very useful and improves operability and field of view.
In the latter part of the lecture, he taught us how to directly construct the abutment without grinding or extracting the tooth for anterior teeth with low crown height diameters due to living teeth. The best results can be achieved by understanding the characteristics of the materials used and selecting and treating the appropriate cases.

[#7 Bonding with microscope]
This is a CR restoration using a microscope and rubber dam. Using actual microscopic cases, he taught us how to do plaque out and how to remove excess resin, and he explained each step in detail, mentioning recommended instruments and materials.
When extraction is performed under the microscope, it is easy to see the difference between the bone surface, soft tissue, and even the defective granulation during curettage of the extraction socket.
This video shows the importance of preoperative CT diagnosis and the importance of anticipating post-extraction treatment.

Microscope (All Videos)

This video includes all of the following videos from Course02&nbsp;Counseling and Consultation. [#1 Importance of Consultation] Explanation to the patient is essential to any treatment. Most patients visiting a dental clinic are nervous. He told us about the clinic's interior design concept, the layout of the counseling room, and other aspects of creating an environment where patients feel comfortable coming to the clinic and where they can discuss their concerns in detail. He also shares some episodes from his time as a practicing dentist about what to keep in mind when providing medical care. [#2 Value of Dental Treatment.] No matter how much time or how many times you spend explaining in detail, showing actual case photos will help patients understand better. Dental treatment is not only about the moment of the procedure. Dr. Uchiyama also talked about how he came to think about hospitality and the factors that constitute the quality of dental treatment. We also have an easy-to-understand explanation of Dr. Uchiyama's thoughts on appointments. [#3 Advantages of Long Appointments] After examination and diagnosis, it is important to make appointments for efficient treatment planning. To solve such a dilemma, Dr. Uchiyama told us how he thought about and made appointments when he was a working doctor, and how he interpreted them. In the latter half of the lecture, he shows us a case study from his working days and discusses about the hygienists he worked with and how he felt when he took charge of one patient for the first time. [#4 Counseling &amp; Consultation 1] Counseling and consultation are extremely important in determining a treatment plan. The lecture explained the interpretation of counseling, necessary materials, and who explains what, based on actual cases. In the latter half of the lecture, he also explains how the specific explanations are given and recommends equipment. [#5 Counseling &amp; Consultation 2] He explained how he describes the current status of the oral cavity during the consultation. Based on the information obtained through the use of many documents, a treatment plan is developed. By always considering the best plan for any case, the patient's opinions and wishes are incorporated, leading to the development of the final treatment plan. [#6 Importance of Case Presentations] Dr. Uchiyama has given case presentations in numerous occasions to date. He talked about the importance of keeping documents on a regular basis and what is gained by presenting cases. When the problems are highlighted and the actual treatment is started, where does Dr. Uchiyama start his intervention? He explains how far he goes in one treatment with actual case videos. [#7 How to Connecting Referrals] Attracting patients is extremely important for the stable management of a dental practice. Although it is very common to receive patients via the Internet, referrals from existing patients are necessary to further increase the number of patients. Dr. Uchiyama told us about an example of a clinic where the majority of patients come to the clinic through referrals. You will also learn about the importance of consultation and what has happened to his patients from the time he was working as a doctor to the present.

This video includes all of the following videos from Course02 Counseling and Consultation.



[#1 Importance of Consultation]

Explanation to the patient is essential to any treatment.

Most patients visiting a dental clinic are nervous. He told us about the clinic's interior design concept, the layout of the counseling room, and other aspects of creating an environment where patients feel comfortable coming to the clinic and where they can discuss their concerns in detail.

He also shares some episodes from his time as a practicing dentist about what to keep in mind when providing medical care.



[#2 Value of Dental Treatment.]

No matter how much time or how many times you spend explaining in detail, showing actual case photos will help patients understand better.

Dental treatment is not only about the moment of the procedure. Dr. Uchiyama also talked about how he came to think about hospitality and the factors that constitute the quality of dental treatment. We also have an easy-to-understand explanation of Dr. Uchiyama's thoughts on appointments.



[#3 Advantages of Long Appointments]

After examination and diagnosis, it is important to make appointments for efficient treatment planning. To solve such a dilemma, Dr. Uchiyama told us how he thought about and made appointments when he was a working doctor, and how he interpreted them.

In the latter half of the lecture, he shows us a case study from his working days and discusses about the hygienists he worked with and how he felt when he took charge of one patient for the first time.



[#4 Counseling & Consultation 1]

Counseling and consultation are extremely important in determining a treatment plan. The lecture explained the interpretation of counseling, necessary materials, and who explains what, based on actual cases.

In the latter half of the lecture, he also explains how the specific explanations are given and recommends equipment.



[#5 Counseling & Consultation 2]

He explained how he describes the current status of the oral cavity during the consultation.

Based on the information obtained through the use of many documents, a treatment plan is developed. By always considering the best plan for any case, the patient's opinions and wishes are incorporated, leading to the development of the final treatment plan.



[#6 Importance of Case Presentations]

Dr. Uchiyama has given case presentations in numerous occasions to date. He talked about the importance of keeping documents on a regular basis and what is gained by presenting cases.

When the problems are highlighted and the actual treatment is started, where does Dr. Uchiyama start his intervention? He explains how far he goes in one treatment with actual case videos.



[#7 How to Connecting Referrals]

Attracting patients is extremely important for the stable management of a dental practice. Although it is very common to receive patients via the Internet, referrals from existing patients are necessary to further increase the number of patients.

Dr. Uchiyama told us about an example of a clinic where the majority of patients come to the clinic through referrals.

You will also learn about the importance of consultation and what has happened to his patients from the time he was working as a doctor to the present.



Counseling and Consultation

This video includes all of the following videos from Course02  Counseling and Consultation.

[#1 Importance of Consultation]
Explanation to the patient is essential to any treatment.
Most patients visiting a dental clinic are nervous. He told us about the clinic's interior design concept, the layout of the counseling room, and other aspects of creating an environment where patients feel comfortable coming to the clinic and where they can discuss their concerns in detail.
He also shares some episodes from his time as a practicing dentist about what to keep in mind when providing medical care.

[#2 Value of Dental Treatment.]
No matter how much time or how many times you spend explaining in detail, showing actual case photos will help patients understand better.
Dental treatment is not only about the moment of the procedure. Dr. Uchiyama also talked about how he came to think about hospitality and the factors that constitute the quality of dental treatment. We also have an easy-to-understand explanation of Dr. Uchiyama's thoughts on appointments.

[#3 Advantages of Long Appointments]
After examination and diagnosis, it is important to make appointments for efficient treatment planning. To solve such a dilemma, Dr. Uchiyama told us how he thought about and made appointments when he was a working doctor, and how he interpreted them.
In the latter half of the lecture, he shows us a case study from his working days and discusses about the hygienists he worked with and how he felt when he took charge of one patient for the first time.

[#4 Counseling & Consultation 1]
Counseling and consultation are extremely important in determining a treatment plan. The lecture explained the interpretation of counseling, necessary materials, and who explains what, based on actual cases.
In the latter half of the lecture, he also explains how the specific explanations are given and recommends equipment.

[#5 Counseling & Consultation 2]
He explained how he describes the current status of the oral cavity during the consultation.
Based on the information obtained through the use of many documents, a treatment plan is developed. By always considering the best plan for any case, the patient's opinions and wishes are incorporated, leading to the development of the final treatment plan.

[#6 Importance of Case Presentations]
Dr. Uchiyama has given case presentations in numerous occasions to date. He talked about the importance of keeping documents on a regular basis and what is gained by presenting cases.
When the problems are highlighted and the actual treatment is started, where does Dr. Uchiyama start his intervention? He explains how far he goes in one treatment with actual case videos.

[#7 How to Connecting Referrals]
Attracting patients is extremely important for the stable management of a dental practice. Although it is very common to receive patients via the Internet, referrals from existing patients are necessary to further increase the number of patients.
Dr. Uchiyama told us about an example of a clinic where the majority of patients come to the clinic through referrals.
You will also learn about the importance of consultation and what has happened to his patients from the time he was working as a doctor to the present.

Counseling and Consultation (All Videos)

#1 Importance of Consultation

#2 Value of Dental Treatment.

#3 Advantages of Long Appointments

#4 Counseling & Consultation 1

#5 Counseling & Consultation 2

#6 Importance of Case Presentations

#7 How to Connecting Referrals

This video includes all of the following videos from Course01&nbsp;Visualized Treatment system. [#1 Importance of visualization] This course explains the importance of visualizing the treatment process with photographs and videos. The benefits of visualization include - Reevaluation of one's clinical practice - Cooperation with other departments - Smooth communication with dental technicians - Patient explanation However, it is difficult to manage photos and videos. Therefore, Dr. Uchiyama introduces Information management systems that he actually implements in his clinic. By combining multiple applications, Information management can be achieved with minimal cost, time, and stress. Eye-fi"" introduced in the video is no longer in production. keenai"" shown in the video has been discontinued. [#2 Importance of information Sharing] In this video we present the following points Taking pictures Sharing photos Checking on a chairside monitor Combining multiple software programs This step enables more efficient visualization to the patient. In addition, by establishing information management systems, images, videos, and CT data can be shared, and conferences for interdisciplinary approaches can be held online. [#3 Information management systems] Just taking pictures and importing them to a PC does not mean that the pictures will be organized into folders for each patient. He explained the systems that should be implemented at the time of opening a clinic, such as the construction of a Wi-Fi environment and image management methods for each patient. If you look closely at the photos you take on your PC, you may discover mistakes that you don't notice on the spot, such as debris on the mirror or a large angle wiper in the image. We also discuss how to correct such images using free software.

This video includes all of the following videos from Course01 Visualized Treatment system.



[#1 Importance of visualization]

This course explains the importance of visualizing the treatment process with photographs and videos.



The benefits of visualization include



- Reevaluation of one's clinical practice

- Cooperation with other departments

- Smooth communication with dental technicians

- Patient explanation



However, it is difficult to manage photos and videos.

Therefore, Dr. Uchiyama introduces Information management systems that he actually implements in his clinic.

By combining multiple applications, Information management can be achieved with minimal cost, time, and stress.



Eye-fi"" introduced in the video is no longer in production.

keenai"" shown in the video has been discontinued.



[#2 Importance of information Sharing]

In this video we present the following points

Taking pictures

Sharing photos

Checking on a chairside monitor

Combining multiple software programs

This step enables more efficient visualization to the patient.



In addition, by establishing information management systems, images, videos, and CT data can be shared, and conferences for interdisciplinary approaches can be held online.



[#3 Information management systems]

Just taking pictures and importing them to a PC does not mean that the pictures will be organized into folders for each patient. He explained the systems that should be implemented at the time of opening a clinic, such as the construction of a Wi-Fi environment and image management methods for each patient.

If you look closely at the photos you take on your PC, you may discover mistakes that you don't notice on the spot, such as debris on the mirror or a large angle wiper in the image. We also discuss how to correct such images using free software.

Visualized Treatment system

This video includes all of the following videos from Course01  Visualized Treatment system.

[#1 Importance of visualization]
This course explains the importance of visualizing the treatment process with photographs and videos.

The benefits of visualization include

- Reevaluation of one's clinical practice
- Cooperation with other departments
- Smooth communication with dental technicians
- Patient explanation

However, it is difficult to manage photos and videos.
Therefore, Dr. Uchiyama introduces Information management systems that he actually implements in his clinic.
By combining multiple applications, Information management can be achieved with minimal cost, time, and stress.

Eye-fi"" introduced in the video is no longer in production.
keenai"" shown in the video has been discontinued.

[#2 Importance of information Sharing]
In this video we present the following points
Taking pictures
Sharing photos
Checking on a chairside monitor
Combining multiple software programs
This step enables more efficient visualization to the patient.

In addition, by establishing information management systems, images, videos, and CT data can be shared, and conferences for interdisciplinary approaches can be held online.

[#3 Information management systems]
Just taking pictures and importing them to a PC does not mean that the pictures will be organized into folders for each patient. He explained the systems that should be implemented at the time of opening a clinic, such as the construction of a Wi-Fi environment and image management methods for each patient.
If you look closely at the photos you take on your PC, you may discover mistakes that you don't notice on the spot, such as debris on the mirror or a large angle wiper in the image. We also discuss how to correct such images using free software.

 Visualized Treatment system (All Videos)

#1 Importance of visualization

#2 Importance of information Sharing

#3 Information management systems

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.

Selective etching

Table top veneer

Etching

Bonding

Cementation

Adjustment and polishing

Case

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.

Laminated veneers

Selective etching & bulk fill

Forming

Probi

Selective Etching

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.

How to use Light Cure and Dual Cure

Case1

Case2

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.

Tetsuya Uchiyama

About me