Micro generalist
Dentist at Minamiaoyama,tokyo,Japan

Tetsuya Uchiyama

Sample movies of Dr.Uchiyama Course 9.

This video includes all of the following videos from Course09 Crown lengthening & Extrusion.



[#1 Understanding the Dentogingival Complex]

Gingivitis and periodontitis are caused by various reasons, but it is necessary to correctly diagnose why inflammation occurs and take appropriate measures.

He presented cases with different causes of gingivitis, and explained the initial treatment and cases caused by occlusion after understanding the Dentogingival Complex.



[#2 Inflammation Control]

If the gingiva bleeds due to gingivitis or periodontitis, or if the gingiva is accidentally injured and bleeds during the procedure, bonding operations and restorative procedures cannot be performed properly.

The use of a rubber dam prevents blood from entering the surgical field and eliminates the risk of damaging healthy gingiva.

In the video of the actual procedure, he explains the advantages in detail and also discusses a case in which a rubber dam cannot be applied due to a residual root condition.



[#3 Facing Hemostasis]

Crown lengthening procedure can be broadly divided into two methods: lateral root shifting and gingival excision, but how should we diagnose and select the right one?

From a review of the GingivalComplex, he explains the diagnostic criteria based on a case using the Widman Improved Method.



[#4 Diagnostic Criteria]

This is a review of the second molar cases mentioned in #3 and the diagnostic criteria.

He also goes into depth on the importance of securing the ferrule to obtain a good prognosis.



[#5 Tooth Extrusion]

In #5, you can see the first crown lengthening and tooth extrusion case that Dr. Uchiyama performed.

Dr. Uchiyama invented the device used in toothextrusion for this case, and also did the wax-up and casting himself.

This case was done in his second year of clinical practice, so you can learn not only the content but also how to deal with patients and dental care as a dentist.



[#6 The case - Short root]

What should be done if the root of the tooth to be treated with tooth extrusion is short?

In this article, he explains a case in which crown lengthening and tooth extrusion were actually performed on a maxillary left first premolar with a short tooth root.



[#7 Suture and Final]

Finally, from suturing to retention, removal, and Final. He also discusses the diagnostic and selection criteria from various requirements not for individual teeth but for the whole jaw. You will learn how to actually remove and retain devices and what to focus on, which cannot be learned only from the knowledge of retention intervals and indications.



[#8 Diagnosis in the aesthetic field]

This is crown lengthening and tooth extrusion with multiple teeth in the maxillary anterior teeth. You will learn not only how to secure the ferrule, but also what to focus on in the esthetic field, such as the gingival line, and how to deal with it.



[#9 Crown Length Rings and Provisional Restorations]

This is crown lengthening and tooth extrusion with multiple teeth in the maxillary anterior teeth. You will learn not only how to secure the ferrule, but also what to focus on in the esthetic field, such as the gingival line, and how to deal with it.



[#10 Provisional Restorations and Prosthetics]

Learn what to look for in provisional restorations and how to match the color tone and form of laminate veneers, prosthetics, and natural teeth.



[#11 Occlusion and Crown Lengthening]

This course is about crown lengthening for difficult cases with occlusal problems.

You will learn about the treatment sequence, methods, and diagnostic criteria. It is a review of the past and focuses on provisional restorations. Please take a look!



[#12 All-round case]

Learn about perio, occlusion, ferrule securement, how to approach cases with a variety of problems and provisional restorations.

Crown lengthening and Extrusion

【sample】Crown lengthening and Extrusion

Sample movies of Dr.Uchiyama Course 8.

This video includes all of the following videos from Course08 Advanced Bonded Restoration .



[#1 Advanced bonded restoration with little or no tooth reduction]

The anterior region has particularly high esthetic demands from the patient, and shade selection is more severe when restoring in resin.

He explained the three factors in determining shade and discussed them in the case photos.

In the latter half of the presentation, he explained the characteristics of Empress Direct, which approximates the color characteristics of natural teeth, and also explained the actual cases treated with Empress Direct.

The last part of the presentation is a case from the time when Dr. Uchiyama was a practicing dentist, and he explains the case with some episodes from those days. Please take a look.



[#2 Importance of Anterior Guidance]

Anterior guidance is a very important and fundamental element in the construction of occlusion. Lack of anterior guidance causes problems not only in the oral cavity but also in the whole body.

In this presentation, he showed a case in which the cuspid guidance was missing, and by constructing the cuspid guidance with CR, not only the occlusion but also the physical problems were improved.

In addition, in a case with a low occlusion, the diagnosis was made using a face bow, and based on the results of the diagnosis, provisional bonding was performed. Please take a look.

Advanced Bonded Restoration 

【sample】Advanced Bonded Restoration 

Sample movies of Dr.Uchiyama Course 7.

This video includes all of the following videos from Course07 BASIC Bonded Restoration 2.



[#1 CR restoration or inlay restoration or table top venner]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Selective Etching, Bulk Fill, Clinical Example (Inlay Restoration)]

What about inactive teeth? There is a big difference in prognosis between anterior and molar teeth. Then, I will explain the inlay restoration using actual cases.

First of all, he reviewed the superiority of rubber dam, which is mentioned in CR, and then he talked about the points when removing the rubber dam and the instruments and methods actually used by Dr. Uchiyama. He also explained the usefulness of selective etching and BulkFill.



[#3 Composite Resin Filling, clinical case (resin filling)]

In #3, we start with a case in which Bulkfill was actually performed under magnified view, and then we discuss the acid treatment as a pre-treatment. Then, cementation is one of the problems in indirect restorations. Based on clear evidence, Dr. Uchiyama uses CR and resin cements for restorations, and he uses them differently depending on the case.



[#4 Cementation, clinical case (inlay restoration)]

This is the actual cementation. He talks about everything from infiltration anesthesia to pretreatment and cementation. He also explains in detail what to check when setting.



[#5 Table top venner, clinical case]

This is an actual case of table top veneer restoration. He explains the diagnostic diagnosis and characteristic BulkFill, and you can also see the efficient probing fabrication.



[#6 Clinical case (Table top veneer)]

Actual bonding. He explained the process from selective etching as a pretreatment, cementation using CR, occlusal adjustment, and polishing, using case examples. He showed that one of the difficulties in table top veneer restoration is the position and height of the occlusal contact point, and that communication with the technician is important.



BASIC Bonded Restoration 2

【sample】BASIC Bonded Restoration 2

Sample movies of Dr.Uchiyama Course 6.

This video includes all of the following videos from Course06 BASIC Bonded Restoration 1.



[#1 Bonded Restoration, the advantages of using micro for bonding]

The recent development and evolution of materials has made bonding more complex, and it is difficult to know what to use for indirect restorations as well. First of all, he talked about the clinical selection criteria of CR, inlay, or table top venner, based on the evidence of physical properties.



[#2 Enamel Preservation & Selective Etching, clinical case (caries removal)#3 Composite Resin Filling, clinical case (resin filling)]

In resin filling, bonding is a very important step to determine the prognosis of treatment. Dr. Uchiyama introduces the advantages of Selective Etching and the instruments and materials he uses for caries removal and bonding pretreatment, citing the literature.

In the latter half of the video, Dr. Uchiyama talks about the recent transition of the bonding system, including his episodes about the complexity of the former bonding system. Please check the video.



[#3 Composite Resin Filling, clinical case (resin filling)]

Although the 2-step system is superior to the 1-step system in terms of bond strength, this does not mean that the 1-step system is useless. He explains the cases in which the universal system should be used.

It is not only the bonding system that has developed in recent years. The physical properties of composite resins have also made great strides, with some flow-type products having physical properties superior to those of pastes. Among such composite resins, Dr. Uchiyama introduces his favorite products.

Please enjoy the detailed explanation of the physical properties of the most frequently used composite resins and watch the video of Dr. Uchiyama's resin filling operation.



[#4 Bulk Fill, Clinical case (lining to resin filling)]

In the past, it was a major idea that free enamel should be removed when removing caries, but with the development of dental materials and the spread of the concept of MI, it has become possible to preserve tooth structure by performing Bulk Fill.

Dr. Uchiyama introduces the products suitable for Bulk Fill and also explains in detail the irradiation depth of the irradiator, which varies greatly depending on the product. Please take a look at the videos of a series of cases to see how each product is used.



[#5 Tunneling Technique, clinical case (retreatment of adjacent CR)]

Although the magnified field of view provides a much better view than the naked eye, there are some points to keep in mind.

In the first half of the video, you can see the points to keep in mind when filling under such a microscope, as well as morphological correction, occlusal adjustment, and polishing.

In addition, the main points of the Tunneling Technique, which is used without destroying the occlusal surface morphology, are explained in the video.

The second half of the video shows the retreatment of CR on adjacent surfaces, which is often seen in clinical practice.

The video also includes tips on infiltration anesthesia and techniques for removing subgingival caries.



[#6 Clinical case (Retreatment of adjacent CR), strength of Composite Resin]

Every dentist has experienced the guttation of a caries during removal. Even in such cases, there is no need to panic if the procedure is performed under a rubber dam.

In the video, he explains the key points of the MTA cement covering, the subsequent bonding operation, and the filling sequence. In a series of videos, you can see the process from pre-treatment to filling, occlusal adjustment, and polishing. Please take a look.

BASIC Bonded Restoration 1

【sample】BASIC Bonded Restoration 1

Sample movies of Dr.Uchiyama Course 5.

This video includes all of the following videos from Course05 Rubber Dam Isolation.



[#1 Micro Rubberdam Isolation Systems(M.R.I.S)]

Some doctors may say, "I don't use rubber dam dam-proofing and microscope except for root canal treatment.

In his daily clinical practice, Dr. Uchiyama uses micro and rubber dam to improve the accuracy of treatment.

He talked about the knowledge and techniques to achieve this and the advantages of M.R.I.S. with clinical videos.



[#2 Combined use of pressure-discharge code]

He explained the technique to control gingival indentation and bleeding with high accuracy by using both rubber dam dam dam and pressure drainage code.

Especially, the technique to deal with "cases where it is difficult to apply rubber dam after crown removal" will be immediately useful in daily clinical practice. Dr. Uchiyama's clinical video by micro is outstanding and the content is designed to expand the range of the use of rubber dam dam protection. Please take a look.



[#3 drop cone technique]

He explained about the types of sheets and clamps used in rubber dam damming and the position of drilling holes.

It is said, "To be good at it, you must first have good tools." In this video, Dr. Uchiyama introduced the tools that he actually uses, which is very helpful.

If you are going to start rubber damming from now on, you will be able to get closer to the step-up if you have the minimum kinds of tools introduced in this video.

In the latter half of the article, he explains how to apply the rubber dam dam protection in the case of anterior teeth. Please take a look.



[#4 Efficient clamping for therapeutic purposes]

The anterior teeth direct bonding under M.R.I.S was explained in the clinical video using a microscope. 

We can learn the ingenuity of Dr. Uchiyama in his daily clinical practice, such as grinding with a scalpel blade during the formation process and the application of rubber dam according to the treatment purpose.

Especially, the "split dam" method, which is very efficient in the treatment of anterior teeth, will surely be useful in daily clinical practice.

You can learn not only the basic method but also "how to apply rubber dam effectively and efficiently" in a short time. Please take a look.



[#5 split dam technique]

He mainly explained about molar treatment under M.R.I.S. In the first half of the lecture, he talked about split dam in anterior teeth and direct bonding for acid erosion.

In the first half, he talked about split dam in anterior teeth and direct bonding for acid erosion. 

In the middle and the latter half of the video, he explained how to apply the rubber dam on the molars and how to use it according to the content and purpose of the treatment.

The video is designed to help you learn how to apply the rubber dam together with the previous video. Please take a look.



[#6 Rubber dam and pressure drainage threads during ceramic restoration]

He explained about ceramic restoration and direct bonding.

The first half of the lecture was about ceramic restorations using both pressure-discharge threads and rubber dams. By using the rubber dam at the time of setting and also using the compression thread, we can learn the clinical practice of Dr. Uchiyama who pursues more accurate bonding.

In the case presentation in the latter half of the lecture, he explained the anterior direct bonding by M.R.I.S. step by step.

By the explanation using actual clinical videos, you can learn Dr. Uchiyama's technique as if you were watching it up close. It is an impressive case presentation that leads to the next video.



[#7 direct bonding]

Continuing from #6, this lecture is about anterior direct bonding.

He explained the actual filling operation and the importance of checking with multi-directional view when using the microscope. 

Also, the finishing operation is very helpful.

Finally, as a summary, Dr. Uchiyama talked about his thoughts on treatment planning and how he should be as a dentist.

After watching the lecture, you will be able to start your daily clinical practice with a fresh mind.

I would like all doctors to watch this lecture.

Rubber Dam Isolation

【sample】Rubber Dam Isolation

Sample movies of Dr.Uchiyama Course 4.

This video includes all of the following videos from Course04 Anesthesia.



[#1 Pain-free infiltration anesthesia]

Infiltration anesthesia is one of the most patient-unfriendly medical procedures, even though it is performed for most dental procedures. We want to reduce the burden on patients as much as possible.

In #1, he carefully explains the pharmacological effects and physiological characteristics of infiltration anesthesia and analyzes the reasons why patients do not like it in actual clinical practice and the countermeasures against it.



[#2 Various methods of infiltration anesthesia]

Do you have trouble with patients who have difficulty with infiltration anesthesia?

In #2, you have an explanation focusing on the actual method of administering it. Using diagrams and actual clinical videos, he explains in an easy-to-understand manner the countermeasures to be taken when there is inflammation in the tissues, points to keep in mind for mandibular foramen transfer anesthesia, and positioning methods, so you can immediately apply the content in your clinical practice from tomorrow.



[#3 Various methods of administering transmissible anesthesia]

#3 is the application of transfer anesthesia. If you have the knowledge and skills to provide transfer anesthesia to the infraorbital foramen, incisal foramen, and foramen magnum, you can provide a more painless treatment during surgical procedures in the maxilla. You will learn the anatomical features, the range of effects that can be given, and how to actually do it.

Anesthesia

【sample】Anesthesia

Sample movies of Dr.Uchiyama Course 3.

This video includes all of the following videos from Course03 Microscope.



[#1 Advantages of Microscopes]

Do you think that the microscope is a tool for specialists who use it for treatments performed by specialists? According to Dr. Uchiyama, it is a necessary tool for generalists who can use it for any kind of treatment.

He told us about his encounter with the microscope and the changes that have occurred in his practice and body since he started using it in his clinical practice.

He also talks about the method he actually uses in his clinical practice from each point of view on the issue of whether the mirror technique is better or the direct view is better.



[#2 Vision Control in EXTARO 300 ]

Although we tend to focus on the ease of use of microscopes, such as magnification and handling, it is also necessary to know about the type of light source. He explained in detail the differences in visibility between xenon, halogen, and LED light sources.

He said, "When you use a microscope, you can simply see and fill the root canal there and it will be cured. That's all there is to it. That's all there is to it," said Dr. Uchiyama. You should not miss the actual clinical video of a root canal, which is difficult to see in the dark, taken with a microscope.

He also talks about a difficult case of root canal filling of a mandibular molar.



[#3 How to record movies with EXTARO 300]

When recording photos or videos of a microscopic examination, not just any camera will do. It is necessary to understand the features of the microscope and the features of the camera equipment, and to choose a combination that makes the best use of both.

In this session, we talked about the functions and features of microscopes, as well as the minimum camera functions you should know.



[#4 Microscopes and rubber dam]

Don't you think that rubber dams are just for performance and don't affect your clinical practice with or without them?

There was a time when Dr. Uchiyama himself actually did not use them. However, he now uses rubber dams in all cases when he can. He summarized the advantages of using rubber dams and how to prepare them in advance.

He also discussed how to form the abutment teeth with a microscope and how to create a provisional restoration. Please also pay attention to Dr. Uchiyama's focus on how to eliminate bleeding from the gingiva.



[#5 Advantages of rubber dam 1]

When rubber dam protection is used in restorative treatment, it is necessary to drill holes with a certain degree of vigor. Dr. Uchiyama has made it more efficient by using the same drilling method for anterior teeth, molars, and root canal treatment. In the first half of the lecture, he talked about the drilling and fixing methods and the use of floss to fix the rubber dam firmly in place.

In the second half of the lecture, he discussed a difficult case in which the gingiva was black and transparent due to root staining, and esthetically restored the tooth using a microscope and a rubber dam.



[#6 Advantages of rubber dam 2]

In the first half of the presentation, he discussed tips for molar rubber damming to ensure a good target tooth while maintaining a good field of view. The method of fixation without the use of clamps is very useful and improves operability and field of view.

In the latter part of the lecture, he taught us how to directly construct the abutment without grinding or extracting the tooth for anterior teeth with low crown height diameters due to living teeth. The best results can be achieved by understanding the characteristics of the materials used and selecting and treating the appropriate cases.



[#7 Bonding with microscope]

This is a CR restoration using a microscope and rubber dam. Using actual microscopic cases, he taught us how to do plaque out and how to remove excess resin, and he explained each step in detail, mentioning recommended instruments and materials.

When extraction is performed under the microscope, it is easy to see the difference between the bone surface, soft tissue, and even the defective granulation during curettage of the extraction socket.

This video shows the importance of preoperative CT diagnosis and the importance of anticipating post-extraction treatment.



Microscope

【sample】Microscope

Sample movies of Dr.Uchiyama Course 2.

This video includes all of the following videos from Course02 Counseling and Consultation.



[#1 Importance of Consultation]

Explanation to the patient is essential to any treatment.

Most patients visiting a dental clinic are nervous. He told us about the clinic's interior design concept, the layout of the counseling room, and other aspects of creating an environment where patients feel comfortable coming to the clinic and where they can discuss their concerns in detail.

He also shares some episodes from his time as a practicing dentist about what to keep in mind when providing medical care.



[#2 Value of Dental Treatment.]

No matter how much time or how many times you spend explaining in detail, showing actual case photos will help patients understand better.

Dental treatment is not only about the moment of the procedure. Dr. Uchiyama also talked about how he came to think about hospitality and the factors that constitute the quality of dental treatment. We also have an easy-to-understand explanation of Dr. Uchiyama's thoughts on appointments.



[#3 Advantages of Long Appointments]

After examination and diagnosis, it is important to make appointments for efficient treatment planning. To solve such a dilemma, Dr. Uchiyama told us how he thought about and made appointments when he was a working doctor, and how he interpreted them.

In the latter half of the lecture, he shows us a case study from his working days and discusses about the hygienists he worked with and how he felt when he took charge of one patient for the first time.



[#4 Counseling & Consultation 1]

Counseling and consultation are extremely important in determining a treatment plan. The lecture explained the interpretation of counseling, necessary materials, and who explains what, based on actual cases.

In the latter half of the lecture, he also explains how the specific explanations are given and recommends equipment.



[#5 Counseling & Consultation 2]

He explained how he describes the current status of the oral cavity during the consultation.

Based on the information obtained through the use of many documents, a treatment plan is developed. By always considering the best plan for any case, the patient's opinions and wishes are incorporated, leading to the development of the final treatment plan.



[#6 Importance of Case Presentations]

Dr. Uchiyama has given case presentations in numerous occasions to date. He talked about the importance of keeping documents on a regular basis and what is gained by presenting cases.

When the problems are highlighted and the actual treatment is started, where does Dr. Uchiyama start his intervention? He explains how far he goes in one treatment with actual case videos.



[#7 How to Connecting Referrals]

Attracting patients is extremely important for the stable management of a dental practice. Although it is very common to receive patients via the Internet, referrals from existing patients are necessary to further increase the number of patients.

Dr. Uchiyama told us about an example of a clinic where the majority of patients come to the clinic through referrals.

You will also learn about the importance of consultation and what has happened to his patients from the time he was working as a doctor to the present.



Counseling and Consultation

【sample】Counseling and Consultation

Sample movies of Dr.Uchiyama Course 1.

This video includes all of the following videos from Course01 Visualized Treatment system.



[#1 Importance of visualization]

This course explains the importance of visualizing the treatment process with photographs and videos.



The benefits of visualization include



- Reevaluation of one's clinical practice

- Cooperation with other departments

- Smooth communication with dental technicians

- Patient explanation



However, it is difficult to manage photos and videos.

Therefore, Dr. Uchiyama introduces Information management systems that he actually implements in his clinic.

By combining multiple applications, Information management can be achieved with minimal cost, time, and stress.



Eye-fi"" introduced in the video is no longer in production.

keenai"" shown in the video has been discontinued.



[#2 Importance of information Sharing]

In this video we present the following points

Taking pictures

Sharing photos

Checking on a chairside monitor

Combining multiple software programs

This step enables more efficient visualization to the patient.



In addition, by establishing information management systems, images, videos, and CT data can be shared, and conferences for interdisciplinary approaches can be held online.



[#3 Information management systems]

Just taking pictures and importing them to a PC does not mean that the pictures will be organized into folders for each patient. He explained the systems that should be implemented at the time of opening a clinic, such as the construction of a Wi-Fi environment and image management methods for each patient.

If you look closely at the photos you take on your PC, you may discover mistakes that you don't notice on the spot, such as debris on the mirror or a large angle wiper in the image. We also discuss how to correct such images using free software.

Visualized Treatment system

【sample】 Visualized Treatment system

The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. Composite resin restorations are less invasive than other restorative methods and can be treated without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.

This video includes all of the following videos from Course22 BASIC Bonded Restoration -Revised Edition-.

[Course22 BASIC Bonded Restoration -Revised Edition-]
Composite resin restorations are an effective tool for gaining the trust of patients when successful, as it is a treatment that is performed almost every day in daily clinical practice and is a cosmetic dental procedure that can be performed chairside by the dentist without the help of technicians.
Adhesive treatment in dentistry, including composite resin, has evolved remarkably over the past few years with the introduction of many new materials and technologies.
Composite resin restorations performed by Dr. Uchiyama have also undergone significant changes since his 2019 lecture.(Course6, Course7, Course8)

In this lecture, Dr. Uchiyama will explain the changes in the technique from the past and the points and cautions that are important to know for less invasive and more precise restorative treatment using a microscope.
In the case videos, Dr. Uchiyama will explain how to use materials and auxiliary instruments such as clamps, separators, and compression threads, which he actually uses in his clinical practice, through cases of occlusal surfaces, adjacent surfaces, and subgingival caries, which are difficult to approach.
He will also discuss the Comprehensive Abutment Procedure and the use of composite resin in inlays and table-top laminate veneers, so this lecture will definitely be useful for your clinical practice from tomorrow. Please watch this lecture.

[#1 Advantages of CR Restorations and Future Restorative Treatment]
What good can come from focusing on CR restorations? He also explained again about microscopes as a necessary element for high quality restorative treatment.
He will discuss the latest findings and techniques of CR restoration, which has undergone many changes in the five years since the last content was published.

[#2 Rubber Dam and Consultation]
He reviews the advantages of rubber dams, which are also useful in CR restorations, and explains the products used at Micro Dental and how to utilize them. He also introduces the points to keep in mind during the pre-treatment consultation and the knowledge of karyology that should be kept in mind.

[#3 Proximal Caries]
From here, we will discuss the three most difficult CR restoration patterns (contact, subgingival and occlusal) and advanced cases.
First, we will look at contact caries, from the importance of separation from adjacent teeth to each step of cutting and filling, with emphasis on key points. This is a valuable content to see the specific materials and techniques used in the video.

[#4 Flowable Resin and Instruments]
While showing the treatment of contact caries, he explained the performance of the latest floorable resin on the basis of his paper.
Dr. Uchiyama also introduced the other instruments used for filling, which are used by Dr. Uchiyama for precision treatment. The video shows how he performs a series of treatment and explains the treatment to the patient at the end of the treatment.

[#5 Cases that are difficult to separate between adjacent teeth and Anterior Teeth Cases]
We will discuss the chair, which is important for precise treatment, and look at cases of contact caries that cannot be released and cases of anterior teeth. He explains how to avoid grinding adjacent teeth as much as possible and the CR filling method that minimizes the use of strips and values the original tooth morphology.

[#6 Subgingival Caries]
This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction.
Again, we have a detailed explanation of the equipment used and the detailed technique.

[#7 Occlusal Caries]
He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

[#8 Various Advanced Cases]
The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. CR restorations are less invasive than other restorative techniques and can be performed without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.


BASIC Bonded Restoration -Revised Edition-

The last part of the presentation will be a combination of the previous patterns and cases in which CR restorations have been combined with other treatments. Composite resin restorations are less invasive than other restorative methods and can be treated without compromising esthetics. Dr. Uchiyama explained how he established his treatment approach.

#8 Various Advanced Cases

Case 1 including adjacent and occlusal surfaces

Case 2 including adjacent and occlusal surfaces

Combination of composite resin and inlay

Anterior tooth 1-1

Anterior teeth #3

Coprehensive Abutment Procedure

e.max inlay

Shade

Ascorbic acid

Anterior split dam case

Case of midline deviation

Case with many treatment areas

Case with whitening

A case presented as a crown prosthesis

Summary

He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

He talked about the bulk fill resin used in the treatment of occlusal surface caries, as well as the fundamentals, practice, and detailed techniques for creating occlusal surface morphology. Don't miss the video case study of how to create an aesthetic and functional occlusal surface without relying on the lab side.

#7 Occlusal Caries

bulk filling

Occlusal surface morphology

Drop corn technique

"Big teeth" from ATD Japan

Case video

This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction. Again, we have a detailed explanation of the equipment used and the detailed technique.

This section describes the difficult subgingival caries. The use of a compression cord under a rubber dam makes subgingival treatment possible and prevents pulp extraction and tooth extraction.
Again, we have a detailed explanation of the equipment used and the detailed technique.

#6 Subgingival Caries

Caries below the centrifugal margin

Compression and drainage code

Bent ultrasonic scaler

Filling

Submaxillary margins

Sample movies of Dr.Uchiyama Course 11.

【sample】Comprehensive Abutment Procedure 1

This video includes all of the following videos from Course11 Comprehensive Abutment Procedure1. [#1 Comprehensive abutment procedure overview case presentation (minimal formation for non-prosthetic teeth)] In the #1 video, he first explained the concept of the comprehensive abitment procedure. In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers. [#2 Digital Dentistry enabling thinnest provisionals Abutment treatment guidelines for erupted teeth Case presentation (importance of micro)] The #2 video explains the treatment process with the CAP concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The CAP concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary. [#3 Case Presentation (Case with CAP) Core removal method Bonding] The #3 video first explains the reason for the direct method of fiber post &amp; core. It then explains the treatment with the CAP concept through case examples. The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads. [#4 About abutment tooth formation and root canal filling About Internal Bleaching] In the video #4, he first explains the checkpoints during the formation of abutment teeth under the microscope. After that, he explains the technique of internal bleach for inactive and discolored teeth. The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope. [#5 Methods of resin core and abutment tooth formation Formation] Video #5 is a continuation of #4. Almost the entire video is explained by microscope. From the fiber post and core after internal bleach, to the formation of the abutment tooth according to the CAP concept, the adjustment of the provisional, and the final formation, all are explained in the video. The comparison pictures of before and after treatment show that the CAP concept treatment shows good results. [#6 Case Presentation 2 (Comprehensive Dentistry with CAP)] The #6 video is an explanation of a case that has been completed and is now in progress. The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement. The video explained the entire process. [#7 Case Presentation 3 (approach to a hopeless tooth with no ferrule and coloration)] The video #7 explains a case in which the CAP concept was used to treat a tooth without ferrule using the technique we have been explaining so far. In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope. After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional, all of which are also explained in the video. [#8 Root Canal Filling of Case Presentation 3 - Final] Video #8 is a continuation of #7. As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post &amp; core, and final formation of the abutment teeth, all under the microscope. He explained in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the CAP concept for treatment.

This video includes all of the following videos from Course11 Comprehensive Abutment Procedure1.

[#1 Comprehensive abutment procedure overview case presentation (minimal formation for non-prosthetic teeth)]
In the #1 video, he first explained the concept of the comprehensive abitment procedure.
In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers.

[#2 Digital Dentistry enabling thinnest provisionals Abutment treatment guidelines for erupted teeth Case presentation (importance of micro)]
The #2 video explains the treatment process with the CAP concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The CAP concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary.

[#3 Case Presentation (Case with CAP) Core removal method Bonding]
The #3 video first explains the reason for the direct method of fiber post & core.
It then explains the treatment with the CAP concept through case examples.
The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads.

[#4 About abutment tooth formation and root canal filling About Internal Bleaching]
In the video #4, he first explains the checkpoints during the formation of abutment teeth under the microscope.
After that, he explains the technique of internal bleach for inactive and discolored teeth.
The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope.

[#5 Methods of resin core and abutment tooth formation Formation]
Video #5 is a continuation of #4. Almost the entire video is explained by microscope.
From the fiber post and core after internal bleach, to the formation of the abutment tooth according to the CAP concept, the adjustment of the provisional, and the final formation, all are explained in the video.
The comparison pictures of before and after treatment show that the CAP concept treatment shows good results.

[#6 Case Presentation 2 (Comprehensive Dentistry with CAP)]
The #6 video is an explanation of a case that has been completed and is now in progress.
The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement. The video explained the entire process.

[#7 Case Presentation 3 (approach to a hopeless tooth with no ferrule and coloration)]
The video #7 explains a case in which the CAP concept was used to treat a tooth without ferrule using the technique we have been explaining so far.
In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope.
After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional, all of which are also explained in the video.

[#8 Root Canal Filling of Case Presentation 3 - Final]
Video #8 is a continuation of #7.
As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post & core, and final formation of the abutment teeth, all under the microscope.
He explained in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the CAP concept for treatment.


Comprehensive Abutment Procedure 1 (All Videos)

#1 Comprehensive abutment procedure overview case presentation (minimal formation for non-prosthetic teeth)

#2 Digital Dentistry enabling thinnest provisionals Abutment treatment guidelines for erupted teeth Case presentation (importance of micro)

#3 Case Presentation (Case with CAP) Core removal method Bonding

#4 About abutment tooth formation and root canal filling About Internal Bleaching

#5 Methods of resin core and abutment tooth formation Formation

#6 Case Presentation 2 (Comprehensive Dentistry with CAP)

#7 Case Presentation 3 (approach to a hopeless tooth with no ferrule and coloration)

#8 Root Canal Filling of Case Presentation 3 - Final

In the #1 video, he first explained the concept of the Comprehensive Abutment Procedure. In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers.

In the #1 video, he first explained the concept of the Comprehensive Abutment Procedure.
In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers.

#1 Comprehensive Abutment Procedure overview case presentation

Comprehensive Abutment Procedure

Clinical cases performed with the CAP concept

Explanation of the amount of abutment formation in PFM

Paper on abutment formation

Explanation of the formation of monolithic ceramic

The first treatment with the CAP concept

Adjustment of the provisional in the CAP concept

Paper on abutment formation using the CAP concept

The #2 video explains the treatment process with the C.A.P. concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The C.A.P. concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary.

The #2 video explains the treatment process with the C.A.P. concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The C.A.P. concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary.

#2 Digital Dentistry enabling thinnest provisional restorations

Case of restoration of four anterior teeth

CAD/CAM technique for making provisionals

Approach to inactive teeth　

The weak points of resin cores, fiber posts & cores

Importance of microscope when forming CAP concept

The #3 video first explains the reason for the direct method of fiber post &amp; core. It then explains the treatment with the C.A.P. concept through case examples. The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads.

The #3 video first explains the reason for the direct method of fiber post & core.
It then explains the treatment with the C.A.P. concept through case examples.
The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads.

#3 Core removal method and bonding operations

Reasons for using the direct method for fiber posts & cores

Explanation of the CAP concept through case studies

Comparison with the 4 principles of restoration

Metal core removal technique video explanation

Checkpoints of bonding operation for fabrication of bulkheads

In the video #4, he first explains the checkpoints during the preparation of abutment teeth under the microscope. After that, he explains the technique of internal bleach for inactive and discolored teeth. The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope.

In the video #4, he first explains the checkpoints during the preparation of abutment teeth under the microscope.
After that, he explains the technique of internal bleach for inactive and discolored teeth.
The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope.

#4 Preparation of abutment teeth and root canal filling about Internal Bleaching

Formation of abutment teeth under microscope video commentary

How to improve discolorations Internal bleach

The relationship between internal bleach and dentin tubules

A case study of internal bleach

Post-operative internal bleach

Internal bleach technique video commentary

This video is a continuation of #4. Almost the entire video is treated under a microscope. From the fiber post and core after internal bleaching to the formation of the abutment tooth according to the C.A.P. concept, the adjustment of the provisional restoration, and the final formation, all are explained in the video. The comparison pictures of before and after treatment show that the C.A.P. concept treatment shows good results.

This video is a continuation of #4. Almost the entire video is treated under a microscope.
From the fiber post and core after internal bleaching to the formation of the abutment tooth according to the C.A.P. concept, the adjustment of the provisional restoration, and the final formation, all are explained in the video.
The comparison pictures of before and after treatment show that the C.A.P. concept treatment shows good results.

#5 Methods of resin core and Preparation of abutment teeth

Treatment progress and explanation

Fiber post and core technique video

CAP concept for abutment formation

Adjustment of provisionals

Final formation under microscope video

Comparison of the condition of the core before and after the CAP concept

The #6 video is an explanation of a case that has been completed and is now in progress. The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement.

The #6 video is an explanation of a case that has been completed and is now in progress.
The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement.

#6 Case Presentation 2 (Comprehensive Dentistry with C.A.P.)

Comprehensive Dentistry with CAP Case Presentation

Crown removal

Overview of the formation

Split dam technique video

Removal of fiber post and core

Internal bleach preoperative

Post internal bleach

Core construction video

State after core construction

Approximate formation after core construction Video commentary

Adjustment of provisionalization

Tissue management

Pre- and post-operative condition of teeth in the CAP concept

From the initial examination to the final restoration

The video #7 explains a case in which the C.A.P. concept was used to treat a tooth without ferrule using the technique we have been explaining so far. In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope. After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional restoration, all of which are also explained in the video.

The video #7 explains a case in which the C.A.P. concept was used to treat a tooth without ferrule using the technique we have been explaining so far.
In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope.
After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional restoration, all of which are also explained in the video.

#7 Approach to a hopeless tooth with no ferrule and coloration

Dealing with Ferrule-less Teeth

Extrusion Technique Video Commentary

Crown Lengthning Procedure

Removal of Extrusion device

Fabrication of the bulkhead

Conceptual formation video

Adjustment of the provisional

As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post &amp; core, and final preparation of the abutment teeth under the microscope. Dr.Uchiyama explains in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the C.A.P. concept for treatment.

As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post & core, and final preparation of the abutment teeth under the microscope.
Dr.Uchiyama explains in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the C.A.P. concept for treatment.

Internal bleach technique video explanation

Fiber post and core video

Final formation video

At the end of the formation

Initial and final restorations

Pre- and post-operative evaluation

Treatment with CAP concept for anterior teeth Summary

This video includes all of the following videos from Course11 Comprehensive Abutment Procedure1.



[#1 Comprehensive abutment procedure overview case presentation (minimal formation for non-prosthetic teeth)]

In the #1 video, he first explained the concept of the comprehensive abitment procedure.

In the past, the amount of abutment formation was often too large for esthetic prosthetics, but with the advent of Monolithic Ceramic, it has become possible to reduce the amount of abutment formation. This presentation explains this point through clinical cases, including papers.



[#2 Digital Dentistry enabling thinnest provisionals Abutment treatment guidelines for erupted teeth Case presentation (importance of micro)]

The #2 video explains the treatment process with the CAP concept through a case of restoration of four anterior teeth. During the course of the video, he explains how to fabricate uniform thickness provisionals in advance using CAD/CAM. The CAP concept requires the use of a microscope. The video of the actual microscopic formation is used to explain why microscopic procedures are necessary.



[#3 Case Presentation (Case with CAP) Core removal method Bonding]

The #3 video first explains the reason for the direct method of fiber post & core.

It then explains the treatment with the CAP concept through case examples.

The video explains the removal of metal cores and checkpoints for bonding operations in the fabrication of bulkheads.



[#4 About abutment tooth formation and root canal filling About Internal Bleaching]

In the video #4, he first explains the checkpoints during the formation of abutment teeth under the microscope.

After that, he explains the technique of internal bleach for inactive and discolored teeth.

The relationship with the dentin tubules is also explained in detail, and the detailed techniques such as the block-out technique and how far to insert the drug are all explained based on the video using the microscope.



[#5 Methods of resin core and abutment tooth formation Formation]

Video #5 is a continuation of #4. Almost the entire video is explained by microscope.

From the fiber post and core after internal bleach, to the formation of the abutment tooth according to the CAP concept, the adjustment of the provisional, and the final formation, all are explained in the video.

The comparison pictures of before and after treatment show that the CAP concept treatment shows good results.



[#6 Case Presentation 2 (Comprehensive Dentistry with CAP)]

The #6 video is an explanation of a case that has been completed and is now in progress.

The video explains the entire process from the initial examination, to the approximate formation of the prosthesis with the compression threads, detailed explanation of the split dam technique, removal of the fiber post and core, internal bleach, construction of the fiber post and core again, and the final prosthetic placement. The video explained the entire process.



[#7 Case Presentation 3 (approach to a hopeless tooth with no ferrule and coloration)]

The video #7 explains a case in which the CAP concept was used to treat a tooth without ferrule using the technique we have been explaining so far.

In this case, we used extrusion, and the entire process from the installation of the device to the crown lengthening procedure and removal of the device is explained in the video under the microscope.

After that, as in the previous case, we will install the septum wall, form it, and adjust the provisional, all of which are also explained in the video.



[#8 Root Canal Filling of Case Presentation 3 - Final]

Video #8 is a continuation of #7.

As in the previous case, the video explains the entire process from internal bleach, construction of the fiber post & core, and final formation of the abutment teeth, all under the microscope.

He explained in detail the comparison between the initial and final prosthetic examinations, the preoperative and postoperative evaluations, and the advantages of the CAP concept for treatment.



Comprehensive Abutment Procedure 1

Sample movies of Dr.Uchiyama Course 10.

【sample】Abutment Construction

This video includes all of the following videos from Course10 abutment construction. [#1 Direct and indirect methods] In our daily clinical practice, we rarely see an inactive tooth. In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used. [#2 Crown removal to bulkhead formation] Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction. Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation. [#3 Causes of root apex lesions] The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye. Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style. [#4 Situations where rubber dam cannot be applied] When starting root canal treatment, you may encounter many situations where you cannot clamp the rubber dam because of the residual root after removing the core and caries. In the video of the actual treatment, he explains the steps from the formation of the bulkhead to the creation of the provisional restoration, and also explains the key points of each step. [#5 Cases to be saved or not] Continuing from #4, this video shows the treatment steps from root canal treatment after septal formation to root canal filling and provisional restoration. The latter half of the case is also a very difficult case to decide whether to treat or not, but Dr. Uchiyama chose to preserve it and explains in detail the steps leading up to the root canal filling.

This video includes all of the following videos from Course10 abutment construction.

[#1 Direct and indirect methods]
In our daily clinical practice, we rarely see an inactive tooth.
In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used.

[#2 Crown removal to bulkhead formation]
Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction.
Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation.

[#3 Causes of root apex lesions]
The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye.
Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style.

[#4 Situations where rubber dam cannot be applied]
When starting root canal treatment, you may encounter many situations where you cannot clamp the rubber dam because of the residual root after removing the core and caries.
In the video of the actual treatment, he explains the steps from the formation of the bulkhead to the creation of the provisional restoration, and also explains the key points of each step.

[#5 Cases to be saved or not]
Continuing from #4, this video shows the treatment steps from root canal treatment after septal formation to root canal filling and provisional restoration.
The latter half of the case is also a very difficult case to decide whether to treat or not, but Dr. Uchiyama chose to preserve it and explains in detail the steps leading up to the root canal filling.

Abutment Construction (All Videos)

#1 Direct and indirect methods

#2 Crown removal to bulkhead formation

#3 Causes of root apex lesions

#4 Situations where rubber dam cannot be applied

#5 Cases to be saved or not

In our daily clinical practice, we rarely see an inactive tooth. In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used.

In our daily clinical practice, we rarely see an inactive tooth.
In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used.

Reasons for tooth extraction in clinics with advanced maintenance

Problem rates for different core materials

Things to keep in mind about cores

Resin and metal cores after 15 years

Advantages and disadvantages of the direct method

Polymerization shrinkage of resin for each core

Cases that should be done by indirect method

Factors affecting the prognosis of endoscopic restorations

When to perform core construction

Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction. Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation.

Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction.
Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation.

Timing of core construction

Core removal under rubber dam, caries removal

Resin filling and bulkhead

Formation after bulkhead

Provisional restoration

The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye. Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style.

The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye.
Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style.

Provisional restorations

This video includes all of the following videos from Course10 abutment construction.



[#1 Direct and indirect methods]

In our daily clinical practice, we rarely see an inactive tooth.

In most cases, core construction is required after root canal filling or restoration of an inactive tooth, and this book explains the incidence of problems with metal cores, resin cores, and fiber cores, citing the papers. He also explains the advantages and disadvantages of the direct method and cases in which the indirect method should be used.



[#2 Crown removal to bulkhead formation]

Continuing from #1, he explained the timing of core construction from the perspective of infection using the paper and described the best time to perform the construction.

Then, in the actual video, he explains in detail the series of steps from crown removal, caries treatment of adjacent teeth discovered incidentally, bulkhead, and formation.



[#3 Causes of root apex lesions]

The incidence of MB2 in maxillary #6 is quite high and can be difficult to detect with the naked eye.

Please present your own past cases and see how Dr. Uchiyama was able to pursue the cause of the problem by using CT and microscope due to the change in his past and present practice style.



[#4 Situations where rubber dam cannot be applied]

When starting root canal treatment, you may encounter many situations where you cannot clamp the rubber dam because of the residual root after removing the core and caries.

In the video of the actual treatment, he explains the steps from the formation of the bulkhead to the creation of the provisional restoration, and also explains the key points of each step.



[#5 Cases to be saved or not]

Continuing from #4, this video shows the treatment steps from root canal treatment after septal formation to root canal filling and provisional restoration.

The latter half of the case is also a very difficult case to decide whether to treat or not, but Dr. Uchiyama chose to preserve it and explains in detail the steps leading up to the root canal filling.

Tetsuya Uchiyama

About me